| Kv | 8500 rpm/V | database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"KV (RPM/V)": "8500"” |
|---|
| Mass | 4.8 g | excluding cable; database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Weight (excl. Cable) (g)": "4.8"” |
|---|
| Bearing type | Ball Bearing | database.json record 784 (3BHOBBY 1203, 8500 KV) | spec | github.com 2026-11-16“"Bearing Type": "Ball Bearing"” |
|---|
| Cable gauge | 28 AWG | database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Cable Gauge (AWG)": "28"” |
|---|
| Cable length | 50.0 mm | database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Cable length (mm)": "50.0"” |
|---|
| Connector | none | database.json record 784 (3BHOBBY 1203, 8500 KV) | spec | github.com 2026-11-16“"Connector": "none"” |
|---|
| Flux direction | Radial | database.json record 784 (3BHOBBY 1203, 8500 KV) | spec | github.com 2026-11-16“"Flux Direction": "Radial"” |
|---|
| Magnet type | Neodymium | as written; database.json record 784 (3BHOBBY 1203, 8500 KV) | spec | github.com 2026-11-16“"Magnet Type": "Neodymium"” |
|---|
| Mounting pattern diameter | 9.0 mm | database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Mounting Pattern Diameter (mm)": "9.0"” |
|---|
| Mounting screw count | 4 count | database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Number of Mounting Screws": "4"” |
|---|
| Mounting screw thread | M2 | database.json record 784 (3BHOBBY 1203, 8500 KV) | spec | github.com 2026-11-16“"Mounting Screw Thread": "M2"” |
|---|
| Shaft dia. | 1.5 mm | external shaft diameter, as the data set names it; database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Shaft Diameter (external) (mm)": "1.5"” |
|---|
| Shaft retention | Clip | database.json record 784 (3BHOBBY 1203, 8500 KV) | spec | github.com 2026-11-16“"Shaft Retention": "Clip"” |
|---|
| Stator diameter | 12.0 mm | database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Stator Diameter (mm)": "12.0"” |
|---|
| Stator height | 3.0 mm | database.json record 784 (3BHOBBY 1203, 8500 KV); unit from the key name | spec | github.com 2026-11-16“"Stator Height (mm)": "3.0"” |
|---|