
Flipsky 75_100 (Flipsky FOC 75100)
Flipsky VESC-compatible brushless motor controller, VESC firmware hardware target '75_100' (hwconf/flipsky (community configs for Flipsky boards) of the GPL-3.0 vedderb/bldc firmware). The facts are the firmware's hardware limits for motor current, battery current, absolute current and input-voltage window, not maker ratings. The header calls it 'Config for Flipsky FOC 75100 (75100V201 circuit board)'.
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Fw abs current limit | 160 A | limit in the VESC firmware hardware header, not a maker rating; hardware target 75_100 ('#define HW_NAME "75_100"' in hwconf/flipsky/hw_75_100.h; selected by hwconf/flipsky/hw_75_100.h); HW_LIM_CURRENT_ABS upper bound: largest absolute-current fault threshold the firmware accepts. Unit A: lispBM/README.md 'l-abs-current-max ; Abs max current in A'; header comment: (jaykup) abs phase amps (Flipsky firmware max is 160A); licence of hw_75_100.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0' | claim | github.com 2026-11-16“#define HW_LIM_CURRENT_ABS 0.0, 160.0 // (jaykup) abs phase amps (Flipsky firmware max is 160A)” |
| Fw current limit | 120 A | limit in the VESC firmware hardware header, not a maker rating; hardware target 75_100 ('#define HW_NAME "75_100"' in hwconf/flipsky/hw_75_100.h; selected by hwconf/flipsky/hw_75_100.h); HW_LIM_CURRENT upper bound: the largest motor (phase) current setting the VESC firmware accepts on this hardware, a firmware limit, not a continuous rating. Unit A: comm/commands.c clamps l_current_max with HW_LIM_CURRENT; lispBM/README.md: 'l-current-max ; Maximum current in A'; header comment: (jaykup) phase amps (Flipsky states 120 max phase amps.); licence of hw_75_100.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0' | claim | github.com 2026-11-16“#define HW_LIM_CURRENT -120.0, 120.0 // (jaykup) phase amps (Flipsky states 120 max phase amps.)” |
| Fw input current limit | 120 A | limit in the VESC firmware hardware header, not a maker rating; hardware target 75_100 ('#define HW_NAME "75_100"' in hwconf/flipsky/hw_75_100.h; selected by hwconf/flipsky/hw_75_100.h); HW_LIM_CURRENT_IN upper bound: largest battery (input) current setting the firmware accepts. Unit A: lispBM/README.md 'l-in-current-max ; Maximum input current in A'; header comment: (jaykup) battery amps (Flipsky states 100 max battery amps, but their firmware is at 120A); licence of hw_75_100.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0' | claim | github.com 2026-11-16“#define HW_LIM_CURRENT_IN -120.0, 120.0 // (jaykup) battery amps (Flipsky states 100 max battery amps, but their firmware is at 120A)” |
| Fw input voltage range | 6 to 120 V | limit in the VESC firmware hardware header, not a maker rating; hardware target 75_100 ('#define HW_NAME "75_100"' in hwconf/flipsky/hw_75_100.h; selected by hwconf/flipsky/hw_75_100.h); HW_LIM_VIN: window for the firmware's min/max input-voltage settings (comm/commands.c clamps l_min_vin and l_max_vin with it); a firmware limit, not a rated supply range. Unit V from the macro name (input voltage); hwconf/kingmodel/hw_km_75_100.h writes the same macro's range as '6-120V'; header comment: (jaykup) (ypl firmware); licence of hw_75_100.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0' | claim | github.com 2026-11-16“#define HW_LIM_VIN 6.0, 120.0 // (jaykup) (ypl firmware)” |