Parts › Motor drivers › Flipsky FSESC_75_200_ALU
0 pickedCompare
VESC-based controller in a finned aluminium case, 84 x 54 mm, thick leads with gold bullet plugs
VESC controller: a picture of the part type, not this model. How it works

Flipsky FSESC_75_200_ALU

Flipsky VESC-compatible brushless motor controller, VESC firmware hardware target 'FSESC_75_200_ALU' (hwconf/flipsky (community configs for Flipsky boards) of the GPL-3.0 vedderb/bldc firmware). The facts are the firmware's hardware limits for motor current, battery current, absolute current and input-voltage window, not maker ratings.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Fw abs current limit450 Alimit in the VESC firmware hardware header, not a maker rating; hardware target FSESC_75_200_ALU ('#define HW_NAME "FSESC_75_200_ALU"' in hwconf/flipsky/hw_fsesc_75_200_alu.h; selected by hwconf/flipsky/hw_fsesc_75_200_alu.h); HW_LIM_CURRENT_ABS upper bound: largest absolute-current fault threshold the firmware accepts. Unit A: lispBM/README.md 'l-abs-current-max ; Abs max current in A'; header comment: (jaykup) abs phase amps 1.5x burst; licence of hw_fsesc_75_200_alu.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0'claimgithub.com 2026-11-16“#define HW_LIM_CURRENT_ABS 0.0, 450 // (jaykup) abs phase amps 1.5x burst”
Fw current limit300 Alimit in the VESC firmware hardware header, not a maker rating; hardware target FSESC_75_200_ALU ('#define HW_NAME "FSESC_75_200_ALU"' in hwconf/flipsky/hw_fsesc_75_200_alu.h; selected by hwconf/flipsky/hw_fsesc_75_200_alu.h); HW_LIM_CURRENT upper bound: the largest motor (phase) current setting the VESC firmware accepts on this hardware, a firmware limit, not a continuous rating. Unit A: comm/commands.c clamps l_current_max with HW_LIM_CURRENT; lispBM/README.md: 'l-current-max ; Maximum current in A'; header comment: (jaykup) phase amps based on Flipsky website; licence of hw_fsesc_75_200_alu.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0'claimgithub.com 2026-11-16“#define HW_LIM_CURRENT -300.0, 300.0 // (jaykup) phase amps based on Flipsky website”
Fw input current limit280 Alimit in the VESC firmware hardware header, not a maker rating; hardware target FSESC_75_200_ALU ('#define HW_NAME "FSESC_75_200_ALU"' in hwconf/flipsky/hw_fsesc_75_200_alu.h; selected by hwconf/flipsky/hw_fsesc_75_200_alu.h); HW_LIM_CURRENT_IN upper bound: largest battery (input) current setting the firmware accepts. Unit A: lispBM/README.md 'l-in-current-max ; Maximum input current in A'; header comment: (jaykup) battery amps based on Flipsky website; licence of hw_fsesc_75_200_alu.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0'claimgithub.com 2026-11-16“#define HW_LIM_CURRENT_IN -280.0, 280.0 // (jaykup) battery amps based on Flipsky website”
Fw input voltage range6 to 120 Vlimit in the VESC firmware hardware header, not a maker rating; hardware target FSESC_75_200_ALU ('#define HW_NAME "FSESC_75_200_ALU"' in hwconf/flipsky/hw_fsesc_75_200_alu.h; selected by hwconf/flipsky/hw_fsesc_75_200_alu.h); HW_LIM_VIN: window for the firmware's min/max input-voltage settings (comm/commands.c clamps l_min_vin and l_max_vin with it); a firmware limit, not a rated supply range. Unit V from the macro name (input voltage); hwconf/kingmodel/hw_km_75_100.h writes the same macro's range as '6-120V'; header comment: (jaykup) based on Flipsky 75_100 firmware; licence of hw_fsesc_75_200_alu.h: its own header notice, '... is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.' (GPL-3.0-or-later); README.md: 'The software is released under the GNU General Public License version 3.0'claimgithub.com 2026-11-16“#define HW_LIM_VIN 6.0, 120.0 // (jaykup) based on Flipsky 75_100 firmware”