
Luxonis OAK-D IoT-75
Luxonis OAK-D IoT-75: USB-C stereo depth camera like the OAK-D (two 1 MP OV9282 mono cameras, 12 MP IMX378 colour camera) with an on-board ESP32-WROOM-32D Wi-Fi/Bluetooth module and a BNO086 IMU. Values come from the Luxonis datasheet in the open-hardware repository luxonis/depthai-hardware (MIT licence).
Key specifications
| Resolution | 12 MP, 1 MP source |
|---|---|
| Sensor | Sony IMX378, OmniVision OV9282 source |
| Frame rate | 60 fps, 120 fps source |
| Interface | USB 3.1 Gen1 (USB Type-C); ESP32 Wi-Fi source |
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Resolution | 12 MP | colour camera (Sony IMX378) | spec | github.com 2026-11-16“12 MP color rolling shutter camera” |
| 1 MP | each stereo camera (OmniVision OV9282) | spec | github.com 2026-11-16“MIPI connects OV9282 1MP” | |
| Sensor | Sony IMX378 | colour camera (Sony IMX378) | spec | github.com 2026-11-16“Image sensor Sony IMX378” |
| OmniVision OV9282 | each stereo camera (OmniVision OV9282) | spec | github.com 2026-11-16“Image sensor OmniVision OV9282” | |
| Frame rate | 60 fps | colour camera (Sony IMX378), at 4056x3040 | spec | github.com 2026-11-16“Active pixels 4056x3040@60fps” |
| 120 fps | each stereo camera (OmniVision OV9282), at 1280x800 | spec | github.com 2026-11-16“Active pixels 1280x800@120FPS” | |
| Interface | USB 3.1 Gen1 (USB Type-C); ESP32 Wi-Fi | spec | github.com 2026-11-16“processing. The data is then output to a host via USB 3.1 Gen1” | |
| Depth | 23.3 mm | device size, WxHxD as labelled in the datasheet | spec | github.com 2026-11-16“SIZE (WxHxD) OAK-D-IoT-75 104mm x 41mm x 23.3mm” |
| Fov | 78 deg | colour camera (Sony IMX378); the datasheet gives one FOV value without saying diagonal or horizontal | spec | github.com 2026-11-16“FOV 78° Shutter Type Rolling shutter” |
| 89.5 deg | each stereo camera (OmniVision OV9282); the datasheet gives one FOV value without saying diagonal or horizontal | spec | github.com 2026-11-16“FOV 89.5° Shutter Type Global shutter” | |
| Height | 41 mm | device size, WxHxD as labelled in the datasheet | spec | github.com 2026-11-16“SIZE (WxHxD) OAK-D-IoT-75 104mm x 41mm x 23.3mm” |
| Imu | BNO086 | spec | github.com 2026-11-16“NOR flash and IMU (BNO086) are all connected to the same bus” | |
| Operating temp max | 50 °C | ambient | spec | github.com 2026-11-16“Ambient operating temperature 50 °C” |
| Power | 6 to 7.5 W | typical; min 4 W, max as value_max | spec | github.com 2026-11-16“Power consumption requirement 4 6 7.5 W” |
| Power idle | 2.5 W | idle, Myriad X booted | spec | github.com 2026-11-16“VBUS idle power draw (Myriad X booted) 2.5 W” |
| Shutter | rolling | colour camera (Sony IMX378) | spec | github.com 2026-11-16“Shutter Type Rolling shutter” |
| global | each stereo camera (OmniVision OV9282) | spec | github.com 2026-11-16“Shutter Type Global shutter” | |
| Voltage supply | 5 to 5.25 V | USB VBUS, typical; max as value_max | spec | github.com 2026-11-16“VBUS input supply voltage 5V 5.25 V” |
| Width | 104 mm | device size, WxHxD as labelled in the datasheet | spec | github.com 2026-11-16“SIZE (WxHxD) OAK-D-IoT-75 104mm x 41mm x 23.3mm” |
Variations from this maker
OAK-D · OAK-D Lite · OAK-D Pro · OAK-D S2 · OAK-D Pro PoE (Auto-Focus) · OAK-D Pro PoE (Fixed-Focus) · OAK-D S2 PoE · OAK-D PoE · OAK-D CM4 PoE · OAK-1 · OAK-1 PoE · OAK-1 Lite · OAK-D SR · OAK-D SR PoE