
MyActuator EPS-RH-32 48 V, 50:1
MyActuator (脉塔) EPS-RH-32: robot joint actuator module with strain-wave (harmonic) gear, 48 V, 50:1, 114.5 N.m peak. Values from the Dynamic Robot Joint Actuator Comparison data set (CC BY 4.0, family mt-rh, entry mt-rh-125-50-48), which cites the maker document '12_脉塔_RH谐波模组_250928.pdf'.
Key specifications
| Rated torque | 75 N·m source |
|---|---|
| Peak torque | 114.5 N·m source |
| Gear ratio | 50:1 source |
| Rated speed | 50 rpm source |
| Nominal voltage | 48 V source |
| Rated current | 21.8 A source |
| Mass | 4,320 g source |
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Rated torque | 75 Nm | at the output; value of this entry; unit from the key name 'rated_torque_nm' | spec | github.com 2026-11-16“"rated_torque_nm": 75” |
| Peak torque | 114.5 Nm | at the output; value of this entry; unit from the key name 'peak_torque_nm' | spec | github.com 2026-11-16“"peak_torque_nm": 114.5” |
| Gear ratio | 50 :1 | value of this entry | spec | github.com 2026-11-16“"reduction_ratio": 50” |
| Rated speed | 50 rpm | at the output; value of this entry; unit from the key name 'rated_speed_rpm' | spec | github.com 2026-11-16“"rated_speed_rpm": 50” |
| Nominal voltage | 48 V | rated supply voltage of this variant; value of this entry; unit from the key name 'voltage_v' | spec | github.com 2026-11-16“"voltage_v": 48” |
| Rated current | 21.8 A | stated as continuous current; value of this entry; unit from the key name 'continuous_current_a' | spec | github.com 2026-11-16“"continuous_current_a": 21.8” |
| Mass | 4.32 kg = 4,320 g | value of this entry; unit from the key name 'weight_kg' | spec | github.com 2026-11-16“"weight_kg": 4.32” |
| Allowable axial load | 81.8 kN | allowed axial load on the output; value of this entry; unit from the key name 'axial_load_kn' | spec | github.com 2026-11-16“"axial_load_kn": 81.8” |
| Allowable peak torque start stop | 114.5 Nm | peak torque allowed at start and stop; value of this entry; unit from the key name 'start_stop_peak_torque_nm' | spec | github.com 2026-11-16“"start_stop_peak_torque_nm": 114.5” |
| Allowable radial load | 38.2 kN | allowed radial load on the output; value of this entry; unit from the key name 'radial_load_kn' | spec | github.com 2026-11-16“"radial_load_kn": 38.2” |
| Backdrivable | no | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"backdrivable": false” |
| Backlash | 40 arcsec = 0.6667 arcmin | family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'backlash_arcsec' | spec | github.com 2026-11-16“"backlash_arcsec": 40” |
| Brake | optional | brake option as listed: no, yes, or optional (both offered); value of this entry | spec | github.com 2026-11-16“"brake_options": [ false, true ]” |
| Dual encoder | yes | dual-encoder option as listed: no, yes, or optional; value of this entry | spec | github.com 2026-11-16“"dual_encoder_options": [ true ]” |
| Encoder resolution | 17 bit | motor-side encoder; value of this entry; unit from the key name 'motor_encoder_bits' | spec | github.com 2026-11-16“"motor_encoder_bits": 17” |
| Force sensor | no | force or torque sensor option as listed: no, yes, or optional; value of this entry | spec | github.com 2026-11-16“"force_sensor_options": [ false ]” |
| Hollow shaft diameter | 20 mm | value of this entry; unit from the key name 'hollow_shaft_diameter_mm' | spec | github.com 2026-11-16“"hollow_shaft_diameter_mm": 20” |
| Interface | EC | bus types offered, as written in the data set (EC as written); value of this entry | spec | github.com 2026-11-16“"bus_types": [ "EC" ]” |
| Max. speed | 60 rpm | at the output; value of this entry; unit from the key name 'max_speed_rpm' | spec | github.com 2026-11-16“"max_speed_rpm": 60” |
| Motor topology | radial flux | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"motor_topology": "radial flux"” |
| Outer diameter | 125.3 mm | value of this entry; unit from the key name 'outer_diameter_mm' | spec | github.com 2026-11-16“"outer_diameter_mm": 125.3” |
| Output encoder resolution | 17 bit | output-side encoder; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'output_encoder_bits' | spec | github.com 2026-11-16“"output_encoder_bits": 17” |
| Peak current | 32.1 A | value of this entry; unit from the key name 'peak_current_a' | spec | github.com 2026-11-16“"peak_current_a": 32.1” |
| Rated input power | 282 W | rated electrical input power; value of this entry; unit from the key name 'rated_input_power_w' | spec | github.com 2026-11-16“"rated_input_power_w": 282” |
| Repeatability | 0.01 deg = 0.6 arcmin | positioning repeatability; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'repeatability_deg' | spec | github.com 2026-11-16“"repeatability_deg": 0.01” |
| Transmission type | harmonic | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"type": "harmonic"” |
Variations from this maker
EPS-CEM-15-E-N 48 V, 30:1 · EPS-CEM-25-E-N 48 V, 30:1 · EPS-CEM-45-E-N 48 V, 30:1 · EPS-RH-25 48 V, 100:1 · EPS-RH-25 48 V, 50:1 · EPS-RH-32 48 V, 100:1 · EPS-RH-11 24 V, 80:1 · EPS-RH-14 48 V, 100:1 · EPS-RH-14 48 V, 50:1 · EPS-RH-17 Lite 24 V, 100:1 · EPS-RH-17 48 V, 100:1 · EPS-RH-17 48 V, 50:1 · EPS-RH-20 48 V, 100:1 · EPS-RH-20 48 V, 50:1