| Nozzle temperature | 215 to 225 °C | recommended nozzle temperature range (OFD fields min_print_temperature to max_print_temperature; unit per OFD schemas/filament_schema.json); SpoolmanDB filaments/polymaker.json line 136 is consistent (215-225 °C) | claim | github.com 2026-11-16“"min_print_temperature": 215, "max_print_temperature": 225” |
|---|
| Bed temperature | 25 to 60 °C | recommended bed temperature range (OFD fields min_bed_temperature to max_bed_temperature; unit per OFD schemas/filament_schema.json); SpoolmanDB filaments/polymaker.json line 136 is consistent (25-60 °C) | claim | github.com 2026-11-16“"min_bed_temperature": 25, "max_bed_temperature": 60” |
|---|
| Density | 1.13 g/cm3 | OFD field density, g/cm³ per schemas/filament_schema.json; SpoolmanDB filaments/polymaker.json line 136 gives the same density | claim | github.com 2026-11-16“"density": 1.13” |
|---|
| Drying temperature | 80 °C | recommended drying temperature (OFD field dry_temperature; unit per OFD schemas/filament_schema.json) | claim | github.com 2026-11-16“"dry_temperature": 80” |
|---|
| Drying time | 12 h | recommended drying time at the drying temperature (OFD field dry_time, hours per schemas/filament_schema.json) | claim | github.com 2026-11-16“"dry_time": 12” |
|---|
| Enclosure | not_needed | whether an enclosed printer is needed (OFD field enclosure: required, recommended or not_needed) | claim | github.com 2026-11-16“"enclosure": "not_needed"” |
|---|
| Filament diameter | 1.75 mm | offered filament diameter (sizes.json field diameter, mm per schemas/sizes_schema.json); first seen in colour variant natural | claim | github.com 2026-11-16“"diameter": 1.75” |
|---|
| 2.85 mm | offered filament diameter (sizes.json field diameter, mm per schemas/sizes_schema.json); first seen in colour variant natural | claim | github.com 2026-11-16“"diameter": 2.85” |
| Spool net mass | 750 g = 0.75 kg | offered net filament weight per spool (sizes.json field filament_weight, grams per schemas/sizes_schema.json); first seen in colour variant natural | claim | github.com 2026-11-16“"filament_weight": 750” |
|---|