
Holybro VL53L1X ToF Lidar Rangefinder for Pixhawk I2C
Holybro board with the ST VL53L1X short-range laser time-of-flight sensor on I2C; the ArduPilot VL53L0X/VL53L1X page lists it with its range and notes that bright sunlight cuts range and precision. Values from the ArduPilot wiki (CC BY-SA 3.0).
Key specifications
| Max. range | 4 m 2 sources |
|---|---|
| Max. update rate | 50 Hz source |
| Interface | I2C 2 sources |
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Max. range | 4 m | approximate (up to ~4 m) | spec | github.com 2026-11-16“| [Holybro ST VL53L1X Lidar] | ToF (IR) | up to ~4 m | I2C” |
| 4 m | range the wiki gives for this product; reduced in bright sunlight | spec | github.com 2026-11-16“`Holybro <http://www.holybro.com/product/vl53l1x/>`__ (VL53L1X, 4m)” | |
| Max. update rate | 50 Hz | spec | github.com 2026-11-16“accurate ranging up to 4 m and fast ranging frequency up to 50 Hz” | |
| Interface | I2C | spec | github.com 2026-11-16“Connect the VCC, GND, SDA and SCL lines of the lidar to the I2C port on the autopilot” | |
| I2C | spec | github.com 2026-11-16“| [Holybro ST VL53L1X Lidar] | ToF (IR) | up to ~4 m | I2C” |