Parts › Microcontrollers › LILYGO T-Dongle S3 With LCD [K193]
0 pickedCompare
Microcontroller development board (ESP32 DevKit type), 54 x 28 mm, on its pin rows
Dev board: a picture of the part type, not this model. How it works

LILYGO T-Dongle S3 With LCD [K193]

LILYGO T-Dongle S3: development board described in the Zephyr RTOS board documentation (lilygo/tdongle_s3) with ESP32-S3, 16 MB flash, 240 MHz clock. Values quoted from the Zephyr RTOS board documentation (Apache-2.0).

Key specifications

Key specifications
Max. clock240 MHz source
Flash16,384 KB source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Max. clock240 MHzspecgithub.com 2026-11-16“ESP32-S3 chip (240MHz dual core, Bluetooth 5, WiFi)”
Flash16 MB = 16,384 KBspecgithub.com 2026-11-16“This board is based on the ESP32-S3 with 16MB of flash, WiFi and BLE support. It”
McuESP32-S3specgithub.com 2026-11-16“This board is based on the ESP32-S3 with 16MB of flash, WiFi and BLE support. It”

Variations from this maker

T-Beam 433Mhz Non-Soldered OLED [Q395+L206] · T-Beam 433Mhz Soldered OLED [Q408] · T-Beam 868Mhz Non-Soldered OLED [Q401+L206] · T-Beam 868Mhz Soldered OLED [Q410] · T-Beam 915Mhz Non-Soldered OLED [Q398+L206] · T-Beam 915Mhz Soldered OLED [Q407] · T-Beam 923Mhz Non-Soldered OLED [Q399+L206] · T-Beam 923Mhz Soldered OLED [Q409] · T-Dongle S3 Without LCD [K194]