Parts › Motor drivers › Arduino MKR Motor Carrier
0 pickedCompare
Motor driver HAT for the Raspberry Pi, two dual H-bridge chips, on brass standoffs, 65 x 56.5 mm
Motor driver board: a picture of the part type, not this model. How it works

Arduino MKR Motor Carrier

Arduino MKR Motor Carrier (ASX00003): carrier for MKR boards with MC33926 and DRV8871 H-bridge drivers (5 A and 3 A peak), an ATSAMD11 co-processor at 48 MHz, 6.5 to 11.1 V rated input and a 5 V on-board regulator. Values quoted from the Arduino documentation (arduino/docs-content, CC BY-SA 4.0).

Key specifications

Key specifications
Min. voltage6.5 V source
Max. voltage11.1 V source
Peak current5 A, 3 A source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Min. voltage6.5 Vspecgithub.com 2026-11-16“Rated voltage: 6.5 to 11.1V”
Max. voltage11.1 Vspecgithub.com 2026-11-16“Rated voltage: 6.5 to 11.1V”
Peak current3 ADRV8871 channelsspecgithub.com 2026-11-16“Max current (DRV8871): 3 Amps peak, current limited by current sense resistor.”
5 AMC33926 channelsspecgithub.com 2026-11-16“Max current (MC33926): 5 Amps Peak, RMS current depending on the degree of heat sink provided”
Driver icMC33926 and DRV8871specgithub.com 2026-11-16“Max current (MC33926): 5 Amps Peak”