Parts › Motor drivers › Arduino Nano Motor Carrier
0 pickedCompare
Overall outline, 80 x 60 mm8060mm
One outline drawn to scale from the two dimensions this part's record lists, 80 mm and 60 mm, without saying what each measures. No third dimension is stated. It shows the overall size only.
Motor driver HAT for the Raspberry Pi, two dual H-bridge chips, on brass standoffs, 65 x 56.5 mm
Motor driver board: a picture of the part type, not this model. How it works

Arduino Nano Motor Carrier

Arduino Nano Motor Carrier (ABX00041): carrier for Nano boards with four MP6522 motor drivers (500 mA per driver), servo, encoder and sensor ports, BNO055 IMU, single-cell Li-ion input with charging, 80 x 60 mm, 35 g. Values quoted from the Arduino documentation (arduino/docs-content, CC BY-SA 4.0).

Key specifications

Key specifications
Max. voltage4 V source
Rated current0.5 A source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Max. voltage4 Vpower terminal input, 1S Li-ionspecgithub.com 2026-11-16“Max input voltage (power terminals): 4V (1S Li-Ion Battery)”
Rated current500 mA = 0.5 Amaximum output current per motor driverspecgithub.com 2026-11-16“Max output current per motor driver: 500 mA”
Dimensions80x60 mmlength 80 mm, width 60 mmspecgithub.com 2026-11-16“Width: 60 mm Length: 80 mm”
Driver icMP6522 (x4)specgithub.com 2026-11-16“Motor Drivers (x4): MP6522”
Mass35 gspecgithub.com 2026-11-16“Weight: 35g”
Voltage output12 Vspecgithub.com 2026-11-16“Motor driver output voltage: 12V”