Parts › Microcontrollers › iLabs Challenger+ RP2350 WiFi6/BLE5 With IPEX3 Connector
0 pickedCompare
Microcontroller development board (ESP32 DevKit type), 54 x 28 mm, on its pin rows
Dev board: a picture of the part type, not this model. How it works

iLabs Challenger+ RP2350 WiFi6/BLE5 With IPEX3 Connector

iLabs Challenger+ RP2350 WiFi6/BLE5 (With IPEX3 Connector): development board built on the Raspberry Pi RP2350A microcontroller. Its board definition in the Raspberry Pi pico-sdk (ilabs_challenger_rp2350_wifi_ble.h, BSD-3-Clause) sets the rp2350 platform and 8 MB of QSPI flash.

Key specifications

Key specifications
Flash8,192 KB source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Flash8 MB = 8,192 KBPICO_FLASH_SIZE_BYTES = (8 * 1024 * 1024) bytes in the board header, i.e. 8 MBspecgithub.com 2026-11-16“#define PICO_FLASH_SIZE_BYTES (8 * 1024 * 1024)”
McuRP2350APICO_RP2350A = 1 in the pico-sdk board header: 1 selects RP2350A, 0 RP2350Bspecgithub.com 2026-11-16“#define PICO_RP2350A 1”

Variations from this maker

Challenger+ RP2350 BConnect · Challenger+ RP2350 WiFi6/BLE5 Board Only