Parts › IMUs › SparkFun 6 Degrees of Freedom Breakout - LSM6DSO (Qwiic) SEN-18020
0 pickedCompare
6-axis IMU breakout, 25.4 mm square: 2.5 x 3 mm LGA-14 IMU chip, two 4-pin JST-SH (Qwiic) connectors
6-axis IMU: a picture of the part type, not this model. How it works

SparkFun 6 Degrees of Freedom Breakout - LSM6DSO (Qwiic) SEN-18020

SparkFun Qwiic breakout (SEN-18020) for ST's LSM6DSO 6-axis accelerometer and gyroscope, with a 9 kB FIFO, embedded interrupt functions and I2C and SPI pins; a 3.3 V device that needs a level shifter on 5 V hosts. Specs below are quoted from SparkFun's open-hardware repository for the board (CC BY-SA 4.0), not from a store page.

Key specifications

Key specifications
InterfaceI2C, SPI source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
InterfaceI2C, SPIspecgithub.com 2026-11-16“one side of the board featuring power, I<sup>2</sup>C, and SPI functionality”
Fifo size9 K-byte = 9,216 Bsource writes 9kBspecgithub.com 2026-11-16“a giant 9kB FIFO buffer”
Max. output data rate6.66 kHzspecgithub.com 2026-11-16“capable of reading accelerometer and gyroscope data up to 6.66kHz”
Voltage nominal3.3 Vmore than about 3.6 V can damage the ICspecgithub.com 2026-11-16“the LSM6DSO is a 3.3V device so supplying voltages greater than ~3.6V can permanently damage the IC”

Variations from this maker

6DoF IMU Breakout - LSM6DSV16X