Parts › IMUs › SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic) SEN-15335
0 pickedCompare
9-axis IMU carrier, 20.3 x 12.7 mm: LGA-14 IMU chip (2.5 x 3 mm) and a separate LGA-12 magnetometer chip (2 x 2 mm)
9-axis IMU: a picture of the part type, not this model. How it works

SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic) SEN-15335

SparkFun Qwiic breakout (SEN-15335) for the TDK InvenSense ICM-20948 9-axis motion sensor, with an on-board regulator and level shifters on every I/O pin so it runs from 1.8 to 5.5 V; I2C and SPI both broken out. Specs below are quoted from SparkFun's open-hardware repository for the board (CC BY-SA 4.0), not from a store page.

Key specifications

Key specifications
Supply voltage1.8 to 5.5 V source
Magnetometer range4.9 mT source
InterfaceI2C, SPI source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Supply voltage1.8 to 5.5 Vboard input, regulated on boardspecgithub.com 2026-11-16“Input power on this board should be between **1.8-5.5V**.”
Magnetometer range4900 uT = 4.9 mTspecgithub.com 2026-11-16“3-axis magnetometer with an FSR to ±4900µT”
InterfaceI2C, SPIspecgithub.com 2026-11-16“we've broken out functional pins for both I<sup>2</sup>C and SPI”
Max. SPI clock7 MHzspecgithub.com 2026-11-16“up to the maximum SPI speed of the ICM - 7MHz”