Parts › Microcontrollers › Solder Party RP2040 Stamp
0 pickedCompare
Microcontroller radio module (ESP32-WROOM-32E type), 18 x 25.5 x 3.1 mm, shield can, castellated pads, printed antenna
Module: a picture of the part type, not this model. How it works

Solder Party RP2040 Stamp

Solder Party RP2040 Stamp: development board built on the Raspberry Pi RP2040 microcontroller. Its board definition in the Raspberry Pi pico-sdk (solderparty_rp2040_stamp.h, BSD-3-Clause) sets the rp2040 platform and 8 MB of QSPI flash.

Key specifications

Key specifications
Flash8,192 KB source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Flash8 MB = 8,192 KBPICO_FLASH_SIZE_BYTES = (8 * 1024 * 1024) bytes in the board header, i.e. 8 MBspecgithub.com 2026-11-16“#define PICO_FLASH_SIZE_BYTES (8 * 1024 * 1024)”
McuRP2040PICO_PLATFORM in the pico-sdk board headerspecgithub.com 2026-11-16“pico_board_cmake_set(PICO_PLATFORM, rp2040)”

Variations from this maker

RP2040 Stamp Carrier · RP2040 Stamp Round Carrier