Parts › Microcontrollers › Solder Party RP2350 Stamp
0 pickedCompare
Microcontroller radio module (ESP32-WROOM-32E type), 18 x 25.5 x 3.1 mm, shield can, castellated pads, printed antenna
Module: a picture of the part type, not this model. How it works

Solder Party RP2350 Stamp

Solder Party RP2350 Stamp: development board built on the Raspberry Pi RP2350A microcontroller. Its board definition in the Raspberry Pi pico-sdk (solderparty_rp2350_stamp.h, BSD-3-Clause) sets the rp2350 platform and 16 MB of QSPI flash.

Key specifications

Key specifications
Flash16,384 KB source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Flash16 MB = 16,384 KBPICO_FLASH_SIZE_BYTES = (16 * 1024 * 1024) bytes in the board header, i.e. 16 MBspecgithub.com 2026-11-16“#define PICO_FLASH_SIZE_BYTES (16 * 1024 * 1024)”
McuRP2350APICO_RP2350A = 1 in the pico-sdk board header: 1 selects RP2350A, 0 RP2350Bspecgithub.com 2026-11-16“#define PICO_RP2350A 1”

Variations from this maker

RP2350 Stamp XL