Parts › Belts › Powge GT2x20_pulley_9
0 pickedCompare
Timing pulley HTD 5M, 24 teeth, for a 15 mm belt, with flanges, set screw and 8 mm bore
Timing pulley: a picture of the part type, not this model. How it works

Powge GT2x20_pulley_9

GT2 20-tooth drive pulley for GT2x9 belt (GT2x20_pulley_9); the NopSCADlib row comment names Powge. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/pulleys.scad; positions read from the accessor functions in vitamins/pulley.scad.

Key specifications

Key specifications
Teeth20 teeth source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Teeth20 teethNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 2 = pulley_teeth() 'Number of teeth' (vitamins/pulley.scad:30); a count, no unitspecgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”
Bore diameter5 mmNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 8 = pulley_bore() 'Bore diameter for shaft' (vitamins/pulley.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”
Channel width11 mmNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 5 = pulley_width() 'Width of teeth / belt channel' (vitamins/pulley.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”
Flange diameter16.0 mmNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 9 = pulley_flange_dia() 'Flange diameter' (vitamins/pulley.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”
Flange thickness1.0 mmNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 10 = pulley_flange_thickness() 'Flange thickness' (vitamins/pulley.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”
Hub diameter16 mmNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 6 = pulley_hub_dia() 'Hub diameter' (vitamins/pulley.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”
Hub length7 mmNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 7 = pulley_hub_length() 'Hub length' (vitamins/pulley.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”
Outer diameter12.22 mmNopSCADlib vitamins/pulleys.scad:45 row GT2x20_pulley_9, position 3 = pulley_od() 'Outer diameter' (vitamins/pulley.scad:31); unit mm: the BOM string appends mm to od = pulley_od(type) (vitamins/pulley.scad:60)specgithub.com 2026-11-16“GT2x20_pulley_9 = ["GT2x20_pulley_9", "GT2", 20, 12.22, GT2x9, 11, 16, 7, 5, 16.0, 1.0, 6, 3.25, M4_grub_screw, 2];//Powge”