Parts › Belts › Powge GT2x80_pulley
0 pickedCompare
Timing pulley HTD 5M, 24 teeth, for a 15 mm belt, with flanges, set screw and 8 mm bore
Timing pulley: a picture of the part type, not this model. How it works

Powge GT2x80_pulley

GT2 80-tooth drive pulley for GT2x6 belt (GT2x80_pulley); the NopSCADlib row comment names Powge. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/pulleys.scad; positions read from the accessor functions in vitamins/pulley.scad.

Key specifications

Key specifications
Teeth80 teeth source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Teeth80 teethNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 2 = pulley_teeth() 'Number of teeth' (vitamins/pulley.scad:30); a count, no unitspecgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”
Bore diameter5 mmNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 8 = pulley_bore() 'Bore diameter for shaft' (vitamins/pulley.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”
Channel width7 mmNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 5 = pulley_width() 'Width of teeth / belt channel' (vitamins/pulley.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”
Flange diameter55 mmNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 9 = pulley_flange_dia() 'Flange diameter' (vitamins/pulley.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”
Flange thickness1.0 mmNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 10 = pulley_flange_thickness() 'Flange thickness' (vitamins/pulley.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”
Hub diameter35 mmNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 6 = pulley_hub_dia() 'Hub diameter' (vitamins/pulley.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”
Hub length9 mmNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 7 = pulley_hub_length() 'Hub length' (vitamins/pulley.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”
Outer diameter50.42 mmNopSCADlib vitamins/pulleys.scad:42 row GT2x80_pulley, position 3 = pulley_od() 'Outer diameter' (vitamins/pulley.scad:31); unit mm: the BOM string appends mm to od = pulley_od(type) (vitamins/pulley.scad:60)specgithub.com 2026-11-16“GT2x80_pulley = ["GT2x80_pulley", "GT2", 80, 50.42, GT2x6, 7, 35, 9, 5, 55, 1.0, 6, 4.5, M5_grub_screw, 2]; // Powge branded from West3D”