Parts › Robot computers › Raspberry Pi Compute Module 4 IO Board
0 pickedCompare
Overall outline, 160 x 90 mm16090mm
One outline drawn to scale from the two dimensions this part's record lists, 160 mm and 90 mm, without saying what each measures. No third dimension is stated. It shows the overall size only.
Carrier board (Jetson carrier type), 100 x 80 mm, empty 260-pin module slot, I/O sockets along the far edge, 40-pin header
Carrier board: a picture of the part type, not this model. How it works

Raspberry Pi Compute Module 4 IO Board

Raspberry Pi Compute Module 4 IO Board (CM4IO), the reference carrier for CM4: 12 V barrel jack or 5 V GPIO input, two HDMI, two DSI and two CSI-2 connectors, Gigabit Ethernet with PoE header, PCIe Gen 2 socket and 40-pin GPIO, 160 x 90 mm. Values quoted from the Raspberry Pi documentation repository (CC BY-SA 4.0).

Key specifications

Key specifications
Supply voltage12 V source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Supply voltage12 Vbarrel jack input; 5 V also accepted through the GPIO headerspecgithub.com 2026-11-16“5 V through the GPIO header or 12 V input through barrel jack; supports up to 26 V if PCIe is unused.”
Dimensions160x90 mmspecgithub.com 2026-11-16“5 V through the GPIO header or 12 V through the DC barrel jack |160 mm × 90 mm”
Voltage max26 Vonly if PCIe is unusedspecgithub.com 2026-11-16“5 V through the GPIO header or 12 V input through barrel jack; supports up to 26 V if PCIe is unused.”

Variations from this maker

Compute Module 3+ · Compute Module 4 · Compute Module 4S · Compute Module 5 · Compute Module 5 IO Board