Parts › 3D-print filaments › Filament Unger PLA+
0 pickedCompare
Filament spool 1 kg (200 mm across, 65 mm wide)
PLA: a picture of the part type, not this model. How it works

Filament Unger PLA+

Filament Unger PLA+: PLA 3D-printer filament product line as listed in SpoolmanDB (MIT), 41 colours, 1.75 mm diameter; the entry gives density and the maker's start or range temperatures for nozzle and bed. Not in the Open Filament Database.

Key specifications

Key specifications
Nozzle temperature220 °C source
Bed temperature60 °C source
Density1.28 g/cm³ source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Nozzle temperature220 °CSpoolmanDB filaments/filamentunger.json, object '{color_name}' (PLA+); single starting extruder temperature (CONTRIBUTING.md: the temperature to start at that works in most cases), degrees Celsius per README.mdclaimgithub.com 2026-11-16“"extruder_temp": 220”
Bed temperature60 °CSpoolmanDB filaments/filamentunger.json, object '{color_name}' (PLA+); single starting bed temperature (CONTRIBUTING.md: the temperature to start at that works in most cases), degrees Celsius per README.mdclaimgithub.com 2026-11-16“"bed_temp": 60”
Density1.28 g/cm3SpoolmanDB filaments/filamentunger.json, object '{color_name}' (PLA+); g/cm3 per SpoolmanDB README.mdclaimgithub.com 2026-11-16“"density": 1.28”
Filament diameter1.75 mmSpoolmanDB filaments/filamentunger.json, object '{color_name}' (PLA+); offered diameter, mm per SpoolmanDB README.mdclaimgithub.com 2026-11-16“"diameters": [ 1.75 ]”