| Nozzle temperature | 240 °C | SpoolmanDB filaments/ratrig.json, object 'Punkfil {color_name}' (PETG-CF10); single starting extruder temperature (CONTRIBUTING.md: the temperature to start at that works in most cases), degrees Celsius per README.md | claim | github.com 2026-11-16“"extruder_temp": 240” |
|---|
| Bed temperature | 80 °C | SpoolmanDB filaments/ratrig.json, object 'Punkfil {color_name}' (PETG-CF10); single starting bed temperature (CONTRIBUTING.md: the temperature to start at that works in most cases), degrees Celsius per README.md | claim | github.com 2026-11-16“"bed_temp": 80” |
|---|
| Density | 1.29 g/cm3 | SpoolmanDB filaments/ratrig.json, object 'Punkfil {color_name}' (PETG-CF10); g/cm3 per SpoolmanDB README.md | claim | github.com 2026-11-16“"density": 1.29” |
|---|
| Filament diameter | 1.75 mm | SpoolmanDB filaments/ratrig.json, object 'Punkfil {color_name}' (PETG-CF10); offered diameter, mm per SpoolmanDB README.md | claim | github.com 2026-11-16“"diameters": [ 1.75 ]” |
|---|