Parts › Bearings › Generic LM10LUU
0 pickedCompare
Linear ball bushing, sealed, 10 x 19 x 55 mm: section along the axis and end view55Ø19Ø10mm
Section along the axis and end view drawn to scale from this part's listed shaft diameter 10 mm, outside diameter 19 mm and length 55 mm; the model name states seals on both ends. Schematic, not from the data: ball size, ball rows and track count, retainer, sleeve wall, retaining ring grooves, chamfers and seal shape.
Linear ball bushing LM16UU (16 x 28 x 37 mm) on a 16 mm shaft, a quarter cut away
Linear ball: a picture of the part type, not this model. How it works

Generic LM10LUU

LMxUU-style linear ball bushing LM10LUU. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/linear_bearings.scad; positions read from the accessor functions in vitamins/linear_bearing.scad.

Key specifications

Key specifications
Bore d10 mm source
Outside dia. D19 mm source
Width B55 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore10 mmNopSCADlib vitamins/linear_bearings.scad:30 row LM10LUU, position 3 = bearing_rod_dia() 'Internal diameter' (vitamins/linear_bearing.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM10LUU = ["LM10LUU", 55, 19, 10, 1.3, 18.0, 44.0];”
Outside dia.19 mmNopSCADlib vitamins/linear_bearings.scad:30 row LM10LUU, position 2 = bearing_dia() 'Outside diameter' (vitamins/linear_bearing.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM10LUU = ["LM10LUU", 55, 19, 10, 1.3, 18.0, 44.0];”
Width55 mmNopSCADlib vitamins/linear_bearings.scad:30 row LM10LUU, position 1 = bearing_length() 'Total length' (vitamins/linear_bearing.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM10LUU = ["LM10LUU", 55, 19, 10, 1.3, 18.0, 44.0];”
Groove diameter18.0 mmNopSCADlib vitamins/linear_bearings.scad:30 row LM10LUU, position 5 = bearing_groove_dia() 'Groove diameter' (vitamins/linear_bearing.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM10LUU = ["LM10LUU", 55, 19, 10, 1.3, 18.0, 44.0];”
Groove spacing44.0 mmNopSCADlib vitamins/linear_bearings.scad:30 row LM10LUU, position 6 = bearing_groove_spacing() 'Spacing between grooves, outer to outer, ie includes the grooves themselves' (vitamins/linear_bearing.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM10LUU = ["LM10LUU", 55, 19, 10, 1.3, 18.0, 44.0];”
Groove width1.3 mmNopSCADlib vitamins/linear_bearings.scad:30 row LM10LUU, position 4 = bearing_groove_length() 'Groove length' (vitamins/linear_bearing.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM10LUU = ["LM10LUU", 55, 19, 10, 1.3, 18.0, 44.0];”