Parts › Bearings › Generic LM12LUU
0 pickedCompare
Linear ball bushing, sealed, 12 x 21 x 57 mm: section along the axis and end view57Ø21Ø12mm
Section along the axis and end view drawn to scale from this part's listed shaft diameter 12 mm, outside diameter 21 mm and length 57 mm; the model name states seals on both ends. Schematic, not from the data: ball size, ball rows and track count, retainer, sleeve wall, retaining ring grooves, chamfers and seal shape.
Linear ball bushing LM16UU (16 x 28 x 37 mm) on a 16 mm shaft, a quarter cut away
Linear ball: a picture of the part type, not this model. How it works

Generic LM12LUU

LMxUU-style linear ball bushing LM12LUU. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/linear_bearings.scad; positions read from the accessor functions in vitamins/linear_bearing.scad.

Key specifications

Key specifications
Bore d12 mm source
Outside dia. D21 mm source
Width B57 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore12 mmNopSCADlib vitamins/linear_bearings.scad:28 row LM12LUU, position 3 = bearing_rod_dia() 'Internal diameter' (vitamins/linear_bearing.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12LUU = ["LM12LUU", 57, 21, 12, 1.3, 20.0, 46.0];”
Outside dia.21 mmNopSCADlib vitamins/linear_bearings.scad:28 row LM12LUU, position 2 = bearing_dia() 'Outside diameter' (vitamins/linear_bearing.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12LUU = ["LM12LUU", 57, 21, 12, 1.3, 20.0, 46.0];”
Width57 mmNopSCADlib vitamins/linear_bearings.scad:28 row LM12LUU, position 1 = bearing_length() 'Total length' (vitamins/linear_bearing.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12LUU = ["LM12LUU", 57, 21, 12, 1.3, 20.0, 46.0];”
Groove diameter20.0 mmNopSCADlib vitamins/linear_bearings.scad:28 row LM12LUU, position 5 = bearing_groove_dia() 'Groove diameter' (vitamins/linear_bearing.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12LUU = ["LM12LUU", 57, 21, 12, 1.3, 20.0, 46.0];”
Groove spacing46.0 mmNopSCADlib vitamins/linear_bearings.scad:28 row LM12LUU, position 6 = bearing_groove_spacing() 'Spacing between grooves, outer to outer, ie includes the grooves themselves' (vitamins/linear_bearing.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12LUU = ["LM12LUU", 57, 21, 12, 1.3, 20.0, 46.0];”
Groove width1.3 mmNopSCADlib vitamins/linear_bearings.scad:28 row LM12LUU, position 4 = bearing_groove_length() 'Groove length' (vitamins/linear_bearing.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12LUU = ["LM12LUU", 57, 21, 12, 1.3, 20.0, 46.0];”