Parts › Bearings › Generic LM12UU
0 pickedCompare
Linear ball bushing, sealed, 12 x 21 x 30 mm: section along the axis and end view30Ø21Ø12mm
Section along the axis and end view drawn to scale from this part's listed shaft diameter 12 mm, outside diameter 21 mm and length 30 mm; the model name states seals on both ends. Schematic, not from the data: ball size, ball rows and track count, retainer, sleeve wall, retaining ring grooves, chamfers and seal shape.
Linear ball bushing LM16UU (16 x 28 x 37 mm) on a 16 mm shaft, a quarter cut away
Linear ball: a picture of the part type, not this model. How it works

Generic LM12UU

LMxUU-style linear ball bushing LM12UU. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/linear_bearings.scad; positions read from the accessor functions in vitamins/linear_bearing.scad.

Key specifications

Key specifications
Bore d12 mm source
Outside dia. D21 mm source
Width B30 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore12 mmNopSCADlib vitamins/linear_bearings.scad:27 row LM12UU, position 3 = bearing_rod_dia() 'Internal diameter' (vitamins/linear_bearing.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12UU = ["LM12UU", 30, 21, 12, 1.3, 20.0, 23.0];”
Outside dia.21 mmNopSCADlib vitamins/linear_bearings.scad:27 row LM12UU, position 2 = bearing_dia() 'Outside diameter' (vitamins/linear_bearing.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12UU = ["LM12UU", 30, 21, 12, 1.3, 20.0, 23.0];”
Width30 mmNopSCADlib vitamins/linear_bearings.scad:27 row LM12UU, position 1 = bearing_length() 'Total length' (vitamins/linear_bearing.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12UU = ["LM12UU", 30, 21, 12, 1.3, 20.0, 23.0];”
Groove diameter20.0 mmNopSCADlib vitamins/linear_bearings.scad:27 row LM12UU, position 5 = bearing_groove_dia() 'Groove diameter' (vitamins/linear_bearing.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12UU = ["LM12UU", 30, 21, 12, 1.3, 20.0, 23.0];”
Groove spacing23.0 mmNopSCADlib vitamins/linear_bearings.scad:27 row LM12UU, position 6 = bearing_groove_spacing() 'Spacing between grooves, outer to outer, ie includes the grooves themselves' (vitamins/linear_bearing.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12UU = ["LM12UU", 30, 21, 12, 1.3, 20.0, 23.0];”
Groove width1.3 mmNopSCADlib vitamins/linear_bearings.scad:27 row LM12UU, position 4 = bearing_groove_length() 'Groove length' (vitamins/linear_bearing.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM12UU = ["LM12UU", 30, 21, 12, 1.3, 20.0, 23.0];”