Parts › Bearings › Generic LM16LUU
0 pickedCompare
Linear ball bushing, sealed, 16 x 28 x 70 mm: section along the axis and end view70Ø28Ø16mm
Section along the axis and end view drawn to scale from this part's listed shaft diameter 16 mm, outside diameter 28 mm and length 70 mm; the model name states seals on both ends. Schematic, not from the data: ball size, ball rows and track count, retainer, sleeve wall, retaining ring grooves, chamfers and seal shape.
Linear ball bushing LM16UU (16 x 28 x 37 mm) on a 16 mm shaft, a quarter cut away
Linear ball: a picture of the part type, not this model. How it works

Generic LM16LUU

LMxUU-style linear ball bushing LM16LUU. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/linear_bearings.scad; positions read from the accessor functions in vitamins/linear_bearing.scad.

Key specifications

Key specifications
Bore d16 mm source
Outside dia. D28 mm source
Width B70 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore16 mmNopSCADlib vitamins/linear_bearings.scad:25 row LM16LUU, position 3 = bearing_rod_dia() 'Internal diameter' (vitamins/linear_bearing.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM16LUU = ["LM16LUU", 70, 28, 16, 1.6, 27.0, 53.0];”
Outside dia.28 mmNopSCADlib vitamins/linear_bearings.scad:25 row LM16LUU, position 2 = bearing_dia() 'Outside diameter' (vitamins/linear_bearing.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM16LUU = ["LM16LUU", 70, 28, 16, 1.6, 27.0, 53.0];”
Width70 mmNopSCADlib vitamins/linear_bearings.scad:25 row LM16LUU, position 1 = bearing_length() 'Total length' (vitamins/linear_bearing.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM16LUU = ["LM16LUU", 70, 28, 16, 1.6, 27.0, 53.0];”
Groove diameter27.0 mmNopSCADlib vitamins/linear_bearings.scad:25 row LM16LUU, position 5 = bearing_groove_dia() 'Groove diameter' (vitamins/linear_bearing.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM16LUU = ["LM16LUU", 70, 28, 16, 1.6, 27.0, 53.0];”
Groove spacing53.0 mmNopSCADlib vitamins/linear_bearings.scad:25 row LM16LUU, position 6 = bearing_groove_spacing() 'Spacing between grooves, outer to outer, ie includes the grooves themselves' (vitamins/linear_bearing.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM16LUU = ["LM16LUU", 70, 28, 16, 1.6, 27.0, 53.0];”
Groove width1.6 mmNopSCADlib vitamins/linear_bearings.scad:25 row LM16LUU, position 4 = bearing_groove_length() 'Groove length' (vitamins/linear_bearing.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM16LUU = ["LM16LUU", 70, 28, 16, 1.6, 27.0, 53.0];”