Parts › Bearings › Generic LM5UU
0 pickedCompare
Linear ball bushing, sealed, 5 x 10 x 15 mm: section along the axis and end view15Ø10Ø5mm
Section along the axis and end view drawn to scale from this part's listed shaft diameter 5 mm, outside diameter 10 mm and length 15 mm; the model name states seals on both ends. Schematic, not from the data: ball size, ball rows and track count, retainer, sleeve wall, retaining ring grooves, chamfers and seal shape.
Linear ball bushing LM16UU (16 x 28 x 37 mm) on a 16 mm shaft, a quarter cut away
Linear ball: a picture of the part type, not this model. How it works

Generic LM5UU

LMxUU-style linear ball bushing LM5UU. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/linear_bearings.scad; positions read from the accessor functions in vitamins/linear_bearing.scad.

Key specifications

Key specifications
Bore d5 mm source
Outside dia. D10 mm source
Width B15 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore5 mmNopSCADlib vitamins/linear_bearings.scad:35 row LM5UU, position 3 = bearing_rod_dia() 'Internal diameter' (vitamins/linear_bearing.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM5UU = ["LM5UU", 15, 10, 5, 1.1, 9.5, 10.2];”
Outside dia.10 mmNopSCADlib vitamins/linear_bearings.scad:35 row LM5UU, position 2 = bearing_dia() 'Outside diameter' (vitamins/linear_bearing.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM5UU = ["LM5UU", 15, 10, 5, 1.1, 9.5, 10.2];”
Width15 mmNopSCADlib vitamins/linear_bearings.scad:35 row LM5UU, position 1 = bearing_length() 'Total length' (vitamins/linear_bearing.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM5UU = ["LM5UU", 15, 10, 5, 1.1, 9.5, 10.2];”
Groove diameter9.5 mmNopSCADlib vitamins/linear_bearings.scad:35 row LM5UU, position 5 = bearing_groove_dia() 'Groove diameter' (vitamins/linear_bearing.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM5UU = ["LM5UU", 15, 10, 5, 1.1, 9.5, 10.2];”
Groove spacing10.2 mmNopSCADlib vitamins/linear_bearings.scad:35 row LM5UU, position 6 = bearing_groove_spacing() 'Spacing between grooves, outer to outer, ie includes the grooves themselves' (vitamins/linear_bearing.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM5UU = ["LM5UU", 15, 10, 5, 1.1, 9.5, 10.2];”
Groove width1.1 mmNopSCADlib vitamins/linear_bearings.scad:35 row LM5UU, position 4 = bearing_groove_length() 'Groove length' (vitamins/linear_bearing.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM5UU = ["LM5UU", 15, 10, 5, 1.1, 9.5, 10.2];”