Parts › Bearings › Generic LM8LUU
0 pickedCompare
Linear ball bushing, sealed, 8 x 15 x 45 mm: section along the axis and end view45Ø15Ø8mm
Section along the axis and end view drawn to scale from this part's listed shaft diameter 8 mm, outside diameter 15 mm and length 45 mm; the model name states seals on both ends. Schematic, not from the data: ball size, ball rows and track count, retainer, sleeve wall, retaining ring grooves, chamfers and seal shape.
Linear ball bushing LM16UU (16 x 28 x 37 mm) on a 16 mm shaft, a quarter cut away
Linear ball: a picture of the part type, not this model. How it works

Generic LM8LUU

LMxUU-style linear ball bushing LM8LUU. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/linear_bearings.scad; positions read from the accessor functions in vitamins/linear_bearing.scad.

Key specifications

Key specifications
Bore d8 mm source
Outside dia. D15 mm source
Width B45 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore8 mmNopSCADlib vitamins/linear_bearings.scad:32 row LM8LUU, position 3 = bearing_rod_dia() 'Internal diameter' (vitamins/linear_bearing.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM8LUU = ["LM8LUU", 45, 15, 8, 1.1, 14.3, 35.0];”
Outside dia.15 mmNopSCADlib vitamins/linear_bearings.scad:32 row LM8LUU, position 2 = bearing_dia() 'Outside diameter' (vitamins/linear_bearing.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM8LUU = ["LM8LUU", 45, 15, 8, 1.1, 14.3, 35.0];”
Width45 mmNopSCADlib vitamins/linear_bearings.scad:32 row LM8LUU, position 1 = bearing_length() 'Total length' (vitamins/linear_bearing.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM8LUU = ["LM8LUU", 45, 15, 8, 1.1, 14.3, 35.0];”
Groove diameter14.3 mmNopSCADlib vitamins/linear_bearings.scad:32 row LM8LUU, position 5 = bearing_groove_dia() 'Groove diameter' (vitamins/linear_bearing.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM8LUU = ["LM8LUU", 45, 15, 8, 1.1, 14.3, 35.0];”
Groove spacing35.0 mmNopSCADlib vitamins/linear_bearings.scad:32 row LM8LUU, position 6 = bearing_groove_spacing() 'Spacing between grooves, outer to outer, ie includes the grooves themselves' (vitamins/linear_bearing.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM8LUU = ["LM8LUU", 45, 15, 8, 1.1, 14.3, 35.0];”
Groove width1.1 mmNopSCADlib vitamins/linear_bearings.scad:32 row LM8LUU, position 4 = bearing_groove_length() 'Groove length' (vitamins/linear_bearing.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“LM8LUU = ["LM8LUU", 45, 15, 8, 1.1, 14.3, 35.0];”