Parts › Bearings › Generic R12
0 pickedCompare
Deep groove ball bearing, 19.05 x 41.275 x 7.9375 mm: section view and front view7.9375Ø41.275Ø19.05mm
Section and front view drawn to scale from this part's listed bore 19.05 mm, outside diameter 41.275 mm and width 7.9375 mm; the model name states no seal or shield, so none is drawn. Schematic, not from the data: ball size, ball count, pitch circle, cage, raceway grooves, ring shoulders and chamfers.
Deep groove ball bearing 6204 (20 x 47 x 14 mm), a quarter cut away
Deep groove ball: a picture of the part type, not this model. How it works

Generic R12

Open single-row ball bearing, trade size R12 (inch series). Boundary dimensions from the BOSL2 OpenSCAD library's ball_bearing_info() table (BSD-2-Clause). BOSL2 names its row source: ZEN inch-series dimensions.

Key specifications

Key specifications
Bore d19.05 mm source
Outside dia. D41.28 mm source
Width B7.938 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore0.75 in = 19.05 mmBOSL2 ball_bearings.scad:314, row R12: field INNER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 3/4*IN with IN = 25.4 (line 182), so 3/4 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R12", 3/4*IN, 13/8*IN, 5/16*IN, false, false, 0, 0 ], // [Z]”
Outside dia.1.625 in = 41.28 mmBOSL2 ball_bearings.scad:314, row R12: field OUTER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 13/8*IN with IN = 25.4 (line 182), so 13/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R12", 3/4*IN, 13/8*IN, 5/16*IN, false, false, 0, 0 ], // [Z]”
Width0.3125 in = 7.938 mmBOSL2 ball_bearings.scad:314, row R12: field WIDTH (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 5/16*IN with IN = 25.4 (line 182), so 5/16 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R12", 3/4*IN, 13/8*IN, 5/16*IN, false, false, 0, 0 ], // [Z]”

Variations from this maker

R12ZZ