Parts › Bearings › Generic R14
0 pickedCompare
Deep groove ball bearing, 22.225 x 47.625 x 9.525 mm: section view and front view9.525Ø47.625Ø22.225mm
Section and front view drawn to scale from this part's listed bore 22.225 mm, outside diameter 47.625 mm and width 9.525 mm; the model name states no seal or shield, so none is drawn. Schematic, not from the data: ball size, ball count, pitch circle, cage, raceway grooves, ring shoulders and chamfers.
Deep groove ball bearing 6204 (20 x 47 x 14 mm), a quarter cut away
Deep groove ball: a picture of the part type, not this model. How it works

Generic R14

Open single-row ball bearing, trade size R14 (inch series). Boundary dimensions from the BOSL2 OpenSCAD library's ball_bearing_info() table (BSD-2-Clause). BOSL2 names its row source: ZEN inch-series dimensions.

Key specifications

Key specifications
Bore d22.23 mm source
Outside dia. D47.63 mm source
Width B9.525 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore0.875 in = 22.23 mmBOSL2 ball_bearings.scad:315, row R14: field INNER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 7/8*IN with IN = 25.4 (line 182), so 7/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R14", 7/8*IN, 15/8*IN, 3/8*IN, false, false, 0, 0 ], // [Z]”
Outside dia.1.875 in = 47.63 mmBOSL2 ball_bearings.scad:315, row R14: field OUTER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 15/8*IN with IN = 25.4 (line 182), so 15/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R14", 7/8*IN, 15/8*IN, 3/8*IN, false, false, 0, 0 ], // [Z]”
Width0.375 in = 9.525 mmBOSL2 ball_bearings.scad:315, row R14: field WIDTH (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 3/8*IN with IN = 25.4 (line 182), so 3/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R14", 7/8*IN, 15/8*IN, 3/8*IN, false, false, 0, 0 ], // [Z]”

Variations from this maker

R14ZZ