Parts › Bearings › Generic R18ZZ
0 pickedCompare
Deep groove ball bearing, shielded, 28.575 x 53.975 x 12.7 mm: section view and front view12.7Ø53.975Ø28.575mm
Section and front view drawn to scale from this part's listed bore 28.575 mm, outside diameter 53.975 mm and width 12.7 mm; the model name states shields on both sides. Schematic, not from the data: ball size, ball count, pitch circle, cage, raceway grooves, ring shoulders, chamfers and shield shape.
Deep groove ball bearing 6204 (20 x 47 x 14 mm), a quarter cut away
Deep groove ball: a picture of the part type, not this model. How it works

Generic R18ZZ

Shielded single-row ball bearing, trade size R18ZZ (inch series). Boundary dimensions from the BOSL2 OpenSCAD library's ball_bearing_info() table (BSD-2-Clause). BOSL2 names its row source: ZEN inch-series dimensions.

Key specifications

Key specifications
Bore d28.58 mm source
Outside dia. D53.98 mm source
Width B12.7 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore1.125 in = 28.58 mmBOSL2 ball_bearings.scad:330, row R18ZZ: field INNER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 9/8*IN with IN = 25.4 (line 182), so 9/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R18ZZ", 9/8*IN, 17/8*IN, 1/2*IN, true, false, 0, 0 ], // [Z]”
Outside dia.2.125 in = 53.98 mmBOSL2 ball_bearings.scad:330, row R18ZZ: field OUTER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 17/8*IN with IN = 25.4 (line 182), so 17/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R18ZZ", 9/8*IN, 17/8*IN, 1/2*IN, true, false, 0, 0 ], // [Z]”
Width0.5 in = 12.7 mmBOSL2 ball_bearings.scad:330, row R18ZZ: field WIDTH (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 1/2*IN with IN = 25.4 (line 182), so 1/2 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R18ZZ", 9/8*IN, 17/8*IN, 1/2*IN, true, false, 0, 0 ], // [Z]”