Parts › Bearings › Generic R20ZZ
0 pickedCompare
Deep groove ball bearing, shielded, 31.75 x 57.15 x 12.7 mm: section view and front view12.7Ø57.15Ø31.75mm
Section and front view drawn to scale from this part's listed bore 31.75 mm, outside diameter 57.15 mm and width 12.7 mm; the model name states shields on both sides. Schematic, not from the data: ball size, ball count, pitch circle, cage, raceway grooves, ring shoulders, chamfers and shield shape.
Deep groove ball bearing 6204 (20 x 47 x 14 mm), a quarter cut away
Deep groove ball: a picture of the part type, not this model. How it works

Generic R20ZZ

Shielded single-row ball bearing, trade size R20ZZ (inch series). Boundary dimensions from the BOSL2 OpenSCAD library's ball_bearing_info() table (BSD-2-Clause). BOSL2 names its row source: ZEN inch-series dimensions.

Key specifications

Key specifications
Bore d31.75 mm source
Outside dia. D57.15 mm source
Width B12.7 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore1.25 in = 31.75 mmBOSL2 ball_bearings.scad:331, row R20ZZ: field INNER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 10/8*IN with IN = 25.4 (line 182), so 10/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R20ZZ", 10/8*IN, 18/8*IN, 1/2*IN, true, false, 0, 0 ], // [Z]”
Outside dia.2.25 in = 57.15 mmBOSL2 ball_bearings.scad:331, row R20ZZ: field OUTER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 18/8*IN with IN = 25.4 (line 182), so 18/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R20ZZ", 10/8*IN, 18/8*IN, 1/2*IN, true, false, 0, 0 ], // [Z]”
Width0.5 in = 12.7 mmBOSL2 ball_bearings.scad:331, row R20ZZ: field WIDTH (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 1/2*IN with IN = 25.4 (line 182), so 1/2 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R20ZZ", 10/8*IN, 18/8*IN, 1/2*IN, true, false, 0, 0 ], // [Z]”