Parts › Bearings › Generic R22
0 pickedCompare
Deep groove ball bearing, 34.925 x 63.5 x 11.1125 mm: section view and front view11.1125Ø63.5Ø34.925mm
Section and front view drawn to scale from this part's listed bore 34.925 mm, outside diameter 63.5 mm and width 11.1125 mm; the model name states no seal or shield, so none is drawn. Schematic, not from the data: ball size, ball count, pitch circle, cage, raceway grooves, ring shoulders and chamfers.
Deep groove ball bearing 6204 (20 x 47 x 14 mm), a quarter cut away
Deep groove ball: a picture of the part type, not this model. How it works

Generic R22

Open single-row ball bearing, trade size R22 (inch series). Boundary dimensions from the BOSL2 OpenSCAD library's ball_bearing_info() table (BSD-2-Clause). BOSL2 names its row source: ZEN inch-series dimensions.

Key specifications

Key specifications
Bore d34.93 mm source
Outside dia. D63.5 mm source
Width B11.11 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore1.375 in = 34.93 mmBOSL2 ball_bearings.scad:319, row R22: field INNER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 11/8*IN with IN = 25.4 (line 182), so 11/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R22", 11/8*IN, 20/8*IN, 7/16*IN, false, false, 0, 0 ], // [Z]”
Outside dia.2.5 in = 63.5 mmBOSL2 ball_bearings.scad:319, row R22: field OUTER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 20/8*IN with IN = 25.4 (line 182), so 20/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R22", 11/8*IN, 20/8*IN, 7/16*IN, false, false, 0, 0 ], // [Z]”
Width0.4375 in = 11.11 mmBOSL2 ball_bearings.scad:319, row R22: field WIDTH (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 7/16*IN with IN = 25.4 (line 182), so 7/16 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R22", 11/8*IN, 20/8*IN, 7/16*IN, false, false, 0, 0 ], // [Z]”

Variations from this maker

R22ZZ