Parts › Bearings › Generic R24ZZ
0 pickedCompare
Deep groove ball bearing, shielded, 38.1 x 66.675 x 14.2875 mm: section view and front view14.2875Ø66.675Ø38.1mm
Section and front view drawn to scale from this part's listed bore 38.1 mm, outside diameter 66.675 mm and width 14.2875 mm; the model name states shields on both sides. Schematic, not from the data: ball size, ball count, pitch circle, cage, raceway grooves, ring shoulders, chamfers and shield shape.
Deep groove ball bearing 6204 (20 x 47 x 14 mm), a quarter cut away
Deep groove ball: a picture of the part type, not this model. How it works

Generic R24ZZ

Shielded single-row ball bearing, trade size R24ZZ (inch series). Boundary dimensions from the BOSL2 OpenSCAD library's ball_bearing_info() table (BSD-2-Clause). BOSL2 names its row source: ZEN inch-series dimensions.

Key specifications

Key specifications
Bore d38.1 mm source
Outside dia. D66.68 mm source
Width B14.29 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore1.5 in = 38.1 mmBOSL2 ball_bearings.scad:333, row R24ZZ: field INNER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 12/8*IN with IN = 25.4 (line 182), so 12/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R24ZZ", 12/8*IN, 21/8*IN, 9/16*IN, true, false, 0, 0 ], // [Z]”
Outside dia.2.625 in = 66.68 mmBOSL2 ball_bearings.scad:333, row R24ZZ: field OUTER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 21/8*IN with IN = 25.4 (line 182), so 21/8 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R24ZZ", 12/8*IN, 21/8*IN, 9/16*IN, true, false, 0, 0 ], // [Z]”
Width0.5625 in = 14.29 mmBOSL2 ball_bearings.scad:333, row R24ZZ: field WIDTH (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 9/16*IN with IN = 25.4 (line 182), so 9/16 inch; row source tag(s): [Z] ZEN inch-series dimensions https://www.zen.biz/catalogue-Inch-seriesspecgithub.com 2026-11-16“["R24ZZ", 12/8*IN, 21/8*IN, 9/16*IN, true, false, 0, 0 ], // [Z]”