Parts › Bearings › Generic R3
0 pickedCompare
Deep groove ball bearing, 4.7625 x 12.7 x 3.96875 mm: section view and front view3.96875Ø12.7Ø4.7625mm
Section and front view drawn to scale from this part's listed bore 4.7625 mm, outside diameter 12.7 mm and width 3.96875 mm; the model name states no seal or shield, so none is drawn. Schematic, not from the data: ball size, ball count, pitch circle, cage, raceway grooves, ring shoulders and chamfers.
Deep groove ball bearing 6204 (20 x 47 x 14 mm), a quarter cut away
Deep groove ball: a picture of the part type, not this model. How it works

Generic R3

Open single-row ball bearing, trade size R3 (inch series). Boundary dimensions from the BOSL2 OpenSCAD library's ball_bearing_info() table (BSD-2-Clause). BOSL2 names its row source: Ningbo Yuhong open versus shielded inch dimensions.

Key specifications

Key specifications
Bore d4.763 mm source
Outside dia. D12.7 mm source
Width B3.969 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore0.1875 in = 4.763 mmBOSL2 ball_bearings.scad:309, row R3: field INNER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 3/16*IN with IN = 25.4 (line 182), so 3/16 inch; row source tag(s): [I] Ningbo Yuhong open versus shielded inch dimensions https://www.jhbearing.com/product/r-series/specgithub.com 2026-11-16“["R3", 3/16*IN, 1/2*IN, 5/32*IN, false, false, 0, 0 ], // [I]”
Outside dia.0.5 in = 12.7 mmBOSL2 ball_bearings.scad:309, row R3: field OUTER_DIAM (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 1/2*IN with IN = 25.4 (line 182), so 1/2 inch; row source tag(s): [I] Ningbo Yuhong open versus shielded inch dimensions https://www.jhbearing.com/product/r-series/specgithub.com 2026-11-16“["R3", 3/16*IN, 1/2*IN, 5/32*IN, false, false, 0, 0 ], // [I]”
Width0.15625 in = 3.969 mmBOSL2 ball_bearings.scad:309, row R3: field WIDTH (row = trade size, then the legacy array [INNER_DIAM, OUTER_DIAM, WIDTH, SHIELDED, FLANGED, FLANGE_DIAM, FLANGE_WIDTH], line 150); written 5/32*IN with IN = 25.4 (line 182), so 5/32 inch; row source tag(s): [I] Ningbo Yuhong open versus shielded inch dimensions https://www.jhbearing.com/product/r-series/specgithub.com 2026-11-16“["R3", 3/16*IN, 1/2*IN, 5/32*IN, false, false, 0, 0 ], // [I]”

Variations from this maker

R3ZZ