| Pitch | 2.0 mm | NopSCADlib vitamins/belts.scad:33 row GT2x6, position 1 = belt_pitch() 'Pitch in mm' (vitamins/belt.scad:45); unit mm: accessor comment 'Pitch in mm' (vitamins/belt.scad:45) | spec | github.com 2026-11-16“GT2x6 = ["GT2", 2.0, 6, 1.38, 0.75, 0.254];” |
|---|
| Width | 6 mm | NopSCADlib vitamins/belts.scad:33 row GT2x6, position 2 = belt_width() 'Width in mm' (vitamins/belt.scad:46); unit mm: accessor comment 'Width in mm' (vitamins/belt.scad:46) | spec | github.com 2026-11-16“GT2x6 = ["GT2", 2.0, 6, 1.38, 0.75, 0.254];” |
|---|
| Thickness | 1.38 mm | NopSCADlib vitamins/belts.scad:33 row GT2x6, position 3 = belt_thickness() 'Total thickness including teeth' (vitamins/belt.scad:47); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“GT2x6 = ["GT2", 2.0, 6, 1.38, 0.75, 0.254];” |
|---|
| Tooth height | 0.75 mm | NopSCADlib vitamins/belts.scad:33 row GT2x6, position 4 = belt_tooth_height() 'Tooth height' (vitamins/belt.scad:48); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“GT2x6 = ["GT2", 2.0, 6, 1.38, 0.75, 0.254];” |
|---|