Parts › Belts › Generic GT2x9 belt
0 pickedCompare
Timing belt, 2 mm pitch, 9 mm wide: side view and view from the tooth side of a short length92mm
Side view and view from the tooth side of a short length, drawn to scale from this part's listed pitch 2 mm and its listed width 9 mm. The listed belt thickness 1.38 mm and tooth height 0.75 mm are drawn to that size, not dimensioned. The curvilinear GT tooth shape and the cord layer are schematic.
Timing belt T10, 25 mm wide, 260 mm long (26 teeth)
Timing belt: a picture of the part type, not this model. How it works

Generic GT2x9 belt

Timing belt profile GT2, 9 wide as NopSCADlib names it (GT2x9). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/belts.scad; positions read from the accessor functions in vitamins/belt.scad.

Key specifications

Key specifications
Pitch p2 mm source
Width b9 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Pitch2.0 mmNopSCADlib vitamins/belts.scad:34 row GT2x9, position 1 = belt_pitch() 'Pitch in mm' (vitamins/belt.scad:45); unit mm: accessor comment 'Pitch in mm' (vitamins/belt.scad:45)specgithub.com 2026-11-16“GT2x9 = ["GT2", 2.0, 9, 1.38, 0.75, 0.254];”
Width9 mmNopSCADlib vitamins/belts.scad:34 row GT2x9, position 2 = belt_width() 'Width in mm' (vitamins/belt.scad:46); unit mm: accessor comment 'Width in mm' (vitamins/belt.scad:46)specgithub.com 2026-11-16“GT2x9 = ["GT2", 2.0, 9, 1.38, 0.75, 0.254];”
Thickness1.38 mmNopSCADlib vitamins/belts.scad:34 row GT2x9, position 3 = belt_thickness() 'Total thickness including teeth' (vitamins/belt.scad:47); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x9 = ["GT2", 2.0, 9, 1.38, 0.75, 0.254];”
Tooth height0.75 mmNopSCADlib vitamins/belts.scad:34 row GT2x9, position 4 = belt_tooth_height() 'Tooth height' (vitamins/belt.scad:48); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“GT2x9 = ["GT2", 2.0, 9, 1.38, 0.75, 0.254];”