Parts › Belts › Generic T2p5x6 belt
0 pickedCompare
Timing belt T10, 25 mm wide, 260 mm long (26 teeth)
Timing belt: a picture of the part type, not this model. How it works

Generic T2p5x6 belt

Timing belt profile T2.5, 6 wide as NopSCADlib names it (T2p5x6). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/belts.scad; positions read from the accessor functions in vitamins/belt.scad.

Key specifications

Key specifications
Pitch2.5 mm source
Width6 mm source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Pitch2.5 mmNopSCADlib vitamins/belts.scad:31 row T2p5x6, position 1 = belt_pitch() 'Pitch in mm' (vitamins/belt.scad:45); unit mm: accessor comment 'Pitch in mm' (vitamins/belt.scad:45)specgithub.com 2026-11-16“T2p5x6 =["T2.5", 2.5, 6, 1.7, 0.7, 0.3];”
Width6 mmNopSCADlib vitamins/belts.scad:31 row T2p5x6, position 2 = belt_width() 'Width in mm' (vitamins/belt.scad:46); unit mm: accessor comment 'Width in mm' (vitamins/belt.scad:46)specgithub.com 2026-11-16“T2p5x6 =["T2.5", 2.5, 6, 1.7, 0.7, 0.3];”
Thickness1.7 mmNopSCADlib vitamins/belts.scad:31 row T2p5x6, position 3 = belt_thickness() 'Total thickness including teeth' (vitamins/belt.scad:47); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T2p5x6 =["T2.5", 2.5, 6, 1.7, 0.7, 0.3];”
Tooth height0.7 mmNopSCADlib vitamins/belts.scad:31 row T2p5x6, position 4 = belt_tooth_height() 'Tooth height' (vitamins/belt.scad:48); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T2p5x6 =["T2.5", 2.5, 6, 1.7, 0.7, 0.3];”