| Nominal dia. | 8 mm | NopSCADlib vitamins/leadnuts.scad:27 row LSN8x2, position 2 = leadnut_bore() 'Thread size' (vitamins/leadnut.scad:28); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2", 8, 10.2, 15, 22, 3.5, 1.5, 4, 3.5, 8, M3_cap_screw, 2, 2, 0, "dimgrey"];” |
|---|
| Lead | 2 mm | NopSCADlib vitamins/leadnuts.scad:27 row LSN8x2, position 13 = leadnut_lead() 'Screw lead' (vitamins/leadnut.scad:39); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2", 8, 10.2, 15, 22, 3.5, 1.5, 4, 3.5, 8, M3_cap_screw, 2, 2, 0, "dimgrey"];” |
|---|
| Flange diameter | 22 mm | NopSCADlib vitamins/leadnuts.scad:27 row LSN8x2, position 5 = leadnut_flange_dia() 'Flange diameter' (vitamins/leadnut.scad:31); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2", 8, 10.2, 15, 22, 3.5, 1.5, 4, 3.5, 8, M3_cap_screw, 2, 2, 0, "dimgrey"];” |
|---|
| Length | 15 mm | NopSCADlib vitamins/leadnuts.scad:27 row LSN8x2, position 4 = leadnut_height() 'Total height' (vitamins/leadnut.scad:30); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2", 8, 10.2, 15, 22, 3.5, 1.5, 4, 3.5, 8, M3_cap_screw, 2, 2, 0, "dimgrey"];” |
|---|
| Shank diameter | 10.2 mm | NopSCADlib vitamins/leadnuts.scad:27 row LSN8x2, position 3 = leadnut_od() 'Outer diameter of the shank' (vitamins/leadnut.scad:29); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2", 8, 10.2, 15, 22, 3.5, 1.5, 4, 3.5, 8, M3_cap_screw, 2, 2, 0, "dimgrey"];” |
|---|
| Thread pitch | 2 mm | NopSCADlib vitamins/leadnuts.scad:27 row LSN8x2, position 12 = leadnut_pitch() 'Screw pitch' (vitamins/leadnut.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2", 8, 10.2, 15, 22, 3.5, 1.5, 4, 3.5, 8, M3_cap_screw, 2, 2, 0, "dimgrey"];” |
|---|