| Nominal dia. | 16 mm | NopSCADlib vitamins/leadnuts.scad:29 row SFU1610, position 2 = leadnut_bore() 'Thread size' (vitamins/leadnut.scad:28); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610", 16, 28, 42.5, 48, 10, 0, 6, 6, 38/2, M6_cap_screw, 5, 10, 40, "#DFDAC5"];” |
|---|
| Lead | 10 mm | NopSCADlib vitamins/leadnuts.scad:29 row SFU1610, position 13 = leadnut_lead() 'Screw lead' (vitamins/leadnut.scad:39); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610", 16, 28, 42.5, 48, 10, 0, 6, 6, 38/2, M6_cap_screw, 5, 10, 40, "#DFDAC5"];” |
|---|
| Flange diameter | 48 mm | NopSCADlib vitamins/leadnuts.scad:29 row SFU1610, position 5 = leadnut_flange_dia() 'Flange diameter' (vitamins/leadnut.scad:31); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610", 16, 28, 42.5, 48, 10, 0, 6, 6, 38/2, M6_cap_screw, 5, 10, 40, "#DFDAC5"];” |
|---|
| Length | 42.5 mm | NopSCADlib vitamins/leadnuts.scad:29 row SFU1610, position 4 = leadnut_height() 'Total height' (vitamins/leadnut.scad:30); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610", 16, 28, 42.5, 48, 10, 0, 6, 6, 38/2, M6_cap_screw, 5, 10, 40, "#DFDAC5"];” |
|---|
| Shank diameter | 28 mm | NopSCADlib vitamins/leadnuts.scad:29 row SFU1610, position 3 = leadnut_od() 'Outer diameter of the shank' (vitamins/leadnut.scad:29); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610", 16, 28, 42.5, 48, 10, 0, 6, 6, 38/2, M6_cap_screw, 5, 10, 40, "#DFDAC5"];” |
|---|
| Thread pitch | 5 mm | NopSCADlib vitamins/leadnuts.scad:29 row SFU1610, position 12 = leadnut_pitch() 'Screw pitch' (vitamins/leadnut.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610", 16, 28, 42.5, 48, 10, 0, 6, 6, 38/2, M6_cap_screw, 5, 10, 40, "#DFDAC5"];” |
|---|