Parts › Magnets › Generic MAG484
0 pickedCompare
Ring magnet, 6.35 mm diameter, 3.175 mm bore, 6.35 mm thick: front view and side view6.35Ø6.35Ø3.175mm
Front view and side view cut through the axis, drawn to scale from this part's listed diameter 6.35 mm, bore 3.175 mm and thickness 6.35 mm. No magnetization direction is drawn: the name does not state one.
Neodymium magnets, nickel plated: 12 x 3 mm discs, 20 x 10 x 5 mm block, 15 x 6 x 5 mm ring
Ring magnet: a picture of the part type, not this model. How it works

Generic MAG484

Magnet MAG484 (ring magnet). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/magnets.scad; positions read from the accessor functions in vitamins/magnet.scad.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Bore diameter0.125 in = 3.175 mmNopSCADlib vitamins/magnets.scad:25 row MAG484, position 3 = magnet_id() 'Inside diameter if a ring' (vitamins/magnet.scad:27); written inch(1/8): inch(x) is the 'Inch to mm conversion', so inch(x) is x inches (utils/core/global.scad:26)specgithub.com 2026-11-16“MAG484 = ["MAG484", "Magnet", inch(1/4), inch(1/8), inch(1/4), 0.5];”
Height0.25 in = 6.35 mmNopSCADlib vitamins/magnets.scad:25 row MAG484, position 4 = magnet_h() 'Height' (vitamins/magnet.scad:28); written inch(1/4): inch(x) is the 'Inch to mm conversion', so inch(x) is x inches (utils/core/global.scad:26)specgithub.com 2026-11-16“MAG484 = ["MAG484", "Magnet", inch(1/4), inch(1/8), inch(1/4), 0.5];”
Outer diameter0.25 in = 6.35 mmNopSCADlib vitamins/magnets.scad:25 row MAG484, position 2 = magnet_od() 'Outer diameter' (vitamins/magnet.scad:26); written inch(1/4): inch(x) is the 'Inch to mm conversion', so inch(x) is x inches (utils/core/global.scad:26)specgithub.com 2026-11-16“MAG484 = ["MAG484", "Magnet", inch(1/4), inch(1/8), inch(1/4), 0.5];”