
Generic NEMA14_36
NEMA hybrid stepper motor body NEMA14_36. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/stepper_motors.scad; positions read from the accessor functions in vitamins/stepper_motor.scad.
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Frame width | 35.2 mm | NopSCADlib vitamins/stepper_motors.scad:35 row NEMA14_36, position 1 = NEMA_width() 'Width of the square face' (vitamins/stepper_motor.scad:32); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA14_36 = ["NEMA14_36", 35.2, 36, 46.4/2, 21, 11, 2, 5, 21, 26, [8, 8], 3, false, false, 0, 0];” |
| Length | 36 mm | NopSCADlib vitamins/stepper_motors.scad:35 row NEMA14_36, position 2 = NEMA_length() 'Body length' (vitamins/stepper_motor.scad:33); unit mm: the BOM string appends mm to length = NEMA_length(type) (vitamins/stepper_motor.scad:83) | spec | github.com 2026-11-16“NEMA14_36 = ["NEMA14_36", 35.2, 36, 46.4/2, 21, 11, 2, 5, 21, 26, [8, 8], 3, false, false, 0, 0];” |
| Mounting hole spacing | 26 mm | NopSCADlib vitamins/stepper_motors.scad:35 row NEMA14_36, position 9 = NEMA_hole_pitch() 'Screw hole pitch' (vitamins/stepper_motor.scad:40); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA14_36 = ["NEMA14_36", 35.2, 36, 46.4/2, 21, 11, 2, 5, 21, 26, [8, 8], 3, false, false, 0, 0];” |
| Shaft dia. | 5 mm | NopSCADlib vitamins/stepper_motors.scad:35 row NEMA14_36, position 7 = NEMA_shaft_dia() 'Shaft diameter' (vitamins/stepper_motor.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA14_36 = ["NEMA14_36", 35.2, 36, 46.4/2, 21, 11, 2, 5, 21, 26, [8, 8], 3, false, false, 0, 0];” |
| Shaft length | 21 mm | NopSCADlib vitamins/stepper_motors.scad:35 row NEMA14_36, position 8 = NEMA_shaft_length() 'Shaft length above the face, if a list then a leadscrew: length, lead, starts' (vitamins/stepper_motor.scad:39); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA14_36 = ["NEMA14_36", 35.2, 36, 46.4/2, 21, 11, 2, 5, 21, 26, [8, 8], 3, false, false, 0, 0];” |