Parts › Motors › Generic NEMA17_34
0 pickedCompare
Stepper motor, 42.3 mm square face, 34 mm long: front view and side view42.334mm
Front and side view, drawn to scale from this part's listed size: square face 42.3 mm, length 34 mm. The mounting hole spacing 31 mm, the shaft diameter 5 mm and the shaft length 24 mm are drawn at this part's listed size, not dimensioned. The pilot boss, the hole diameter, the corner chamfers and the end caps are schematic.
Stepper motor NEMA 17 (42.3 mm face, 40 mm long)
Stepper: a picture of the part type, not this model. How it works

Generic NEMA17_34

NEMA hybrid stepper motor body NEMA17_34. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/stepper_motors.scad; positions read from the accessor functions in vitamins/stepper_motor.scad.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Frame width42.3 mmNopSCADlib vitamins/stepper_motors.scad:32 row NEMA17_34, position 1 = NEMA_width() 'Width of the square face' (vitamins/stepper_motor.scad:32); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_34 = ["NEMA17_34", 42.3, 34, 53.6/2, 25, 11, 2, 5, 24, 31, [8, 8], 3, false, false, 0, 0];”
Length34 mmNopSCADlib vitamins/stepper_motors.scad:32 row NEMA17_34, position 2 = NEMA_length() 'Body length' (vitamins/stepper_motor.scad:33); unit mm: the BOM string appends mm to length = NEMA_length(type) (vitamins/stepper_motor.scad:83)specgithub.com 2026-11-16“NEMA17_34 = ["NEMA17_34", 42.3, 34, 53.6/2, 25, 11, 2, 5, 24, 31, [8, 8], 3, false, false, 0, 0];”
Mounting hole spacing31 mmNopSCADlib vitamins/stepper_motors.scad:32 row NEMA17_34, position 9 = NEMA_hole_pitch() 'Screw hole pitch' (vitamins/stepper_motor.scad:40); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_34 = ["NEMA17_34", 42.3, 34, 53.6/2, 25, 11, 2, 5, 24, 31, [8, 8], 3, false, false, 0, 0];”
Shaft dia.5 mmNopSCADlib vitamins/stepper_motors.scad:32 row NEMA17_34, position 7 = NEMA_shaft_dia() 'Shaft diameter' (vitamins/stepper_motor.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_34 = ["NEMA17_34", 42.3, 34, 53.6/2, 25, 11, 2, 5, 24, 31, [8, 8], 3, false, false, 0, 0];”
Shaft length24 mmNopSCADlib vitamins/stepper_motors.scad:32 row NEMA17_34, position 8 = NEMA_shaft_length() 'Shaft length above the face, if a list then a leadscrew: length, lead, starts' (vitamins/stepper_motor.scad:39); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_34 = ["NEMA17_34", 42.3, 34, 53.6/2, 25, 11, 2, 5, 24, 31, [8, 8], 3, false, false, 0, 0];”