Parts › Motors › Generic NEMA17_40
0 pickedCompare
Stepper motor, 42.3 mm square face, 40 mm long: front view and side view42.340mm
Front and side view, drawn to scale from this part's listed size: square face 42.3 mm, length 40 mm. The mounting hole spacing 31 mm, the shaft diameter 5 mm and the shaft length 20 mm are drawn at this part's listed size, not dimensioned. The pilot boss, the hole diameter, the corner chamfers and the end caps are schematic.
Stepper motor NEMA 17 (42.3 mm face, 40 mm long)
Stepper: a picture of the part type, not this model. How it works

Generic NEMA17_40

NEMA hybrid stepper motor body NEMA17_40. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/stepper_motors.scad; positions read from the accessor functions in vitamins/stepper_motor.scad.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Frame width42.3 mmNopSCADlib vitamins/stepper_motors.scad:30 row NEMA17_40, position 1 = NEMA_width() 'Width of the square face' (vitamins/stepper_motor.scad:32); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_40 = ["NEMA17_40", 42.3, 40, 53.6/2, 25, 11, 2, 5, 20, 31, [12.5, 11], 3, false, false, 0, 0];”
Length40 mmNopSCADlib vitamins/stepper_motors.scad:30 row NEMA17_40, position 2 = NEMA_length() 'Body length' (vitamins/stepper_motor.scad:33); unit mm: the BOM string appends mm to length = NEMA_length(type) (vitamins/stepper_motor.scad:83)specgithub.com 2026-11-16“NEMA17_40 = ["NEMA17_40", 42.3, 40, 53.6/2, 25, 11, 2, 5, 20, 31, [12.5, 11], 3, false, false, 0, 0];”
Mounting hole spacing31 mmNopSCADlib vitamins/stepper_motors.scad:30 row NEMA17_40, position 9 = NEMA_hole_pitch() 'Screw hole pitch' (vitamins/stepper_motor.scad:40); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_40 = ["NEMA17_40", 42.3, 40, 53.6/2, 25, 11, 2, 5, 20, 31, [12.5, 11], 3, false, false, 0, 0];”
Shaft dia.5 mmNopSCADlib vitamins/stepper_motors.scad:30 row NEMA17_40, position 7 = NEMA_shaft_dia() 'Shaft diameter' (vitamins/stepper_motor.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_40 = ["NEMA17_40", 42.3, 40, 53.6/2, 25, 11, 2, 5, 20, 31, [12.5, 11], 3, false, false, 0, 0];”
Shaft length20 mmNopSCADlib vitamins/stepper_motors.scad:30 row NEMA17_40, position 8 = NEMA_shaft_length() 'Shaft length above the face, if a list then a leadscrew: length, lead, starts' (vitamins/stepper_motor.scad:39); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“NEMA17_40 = ["NEMA17_40", 42.3, 40, 53.6/2, 25, 11, 2, 5, 20, 31, [12.5, 11], 3, false, false, 0, 0];”

Variations from this maker

NEMA17_40L280