
Generic NEMA8_30
NEMA hybrid stepper motor body NEMA8_30. Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/stepper_motors.scad; positions read from the accessor functions in vitamins/stepper_motor.scad.
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Frame width | 20 mm | NopSCADlib vitamins/stepper_motors.scad:26 row NEMA8_30, position 1 = NEMA_width() 'Width of the square face' (vitamins/stepper_motor.scad:32); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA8_30 = ["NEMA8_30", 20, 30, 30/2, 20, 7.5, 1.6, 4, 6, 16, [8, 8], 2, true, true, 0, 0];” |
| Length | 30 mm | NopSCADlib vitamins/stepper_motors.scad:26 row NEMA8_30, position 2 = NEMA_length() 'Body length' (vitamins/stepper_motor.scad:33); unit mm: the BOM string appends mm to length = NEMA_length(type) (vitamins/stepper_motor.scad:83) | spec | github.com 2026-11-16“NEMA8_30 = ["NEMA8_30", 20, 30, 30/2, 20, 7.5, 1.6, 4, 6, 16, [8, 8], 2, true, true, 0, 0];” |
| Mounting hole spacing | 16 mm | NopSCADlib vitamins/stepper_motors.scad:26 row NEMA8_30, position 9 = NEMA_hole_pitch() 'Screw hole pitch' (vitamins/stepper_motor.scad:40); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA8_30 = ["NEMA8_30", 20, 30, 30/2, 20, 7.5, 1.6, 4, 6, 16, [8, 8], 2, true, true, 0, 0];” |
| Shaft dia. | 4 mm | NopSCADlib vitamins/stepper_motors.scad:26 row NEMA8_30, position 7 = NEMA_shaft_dia() 'Shaft diameter' (vitamins/stepper_motor.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA8_30 = ["NEMA8_30", 20, 30, 30/2, 20, 7.5, 1.6, 4, 6, 16, [8, 8], 2, true, true, 0, 0];” |
| Shaft length | 6 mm | NopSCADlib vitamins/stepper_motors.scad:26 row NEMA8_30, position 8 = NEMA_shaft_length() 'Shaft length above the face, if a list then a leadscrew: length, lead, starts' (vitamins/stepper_motor.scad:39); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“NEMA8_30 = ["NEMA8_30", 20, 30, 30/2, 20, 7.5, 1.6, 4, 6, 16, [8, 8], 2, true, true, 0, 0];” |