| Teeth | 16 teeth | NopSCADlib vitamins/pulleys.scad:38 row GT2x16_toothed_idler, position 2 = pulley_teeth() 'Number of teeth' (vitamins/pulley.scad:30); a count, no unit | spec | github.com 2026-11-16“GT2x16_toothed_idler = ["GT2x16_toothed_idler", "GT2", 16, 9.75, GT2x6, 6.5, 14, 0, 3, 14.0, 1.0, 0, 0, false, 0];” |
|---|
| Bore diameter | 3 mm | NopSCADlib vitamins/pulleys.scad:38 row GT2x16_toothed_idler, position 8 = pulley_bore() 'Bore diameter for shaft' (vitamins/pulley.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“GT2x16_toothed_idler = ["GT2x16_toothed_idler", "GT2", 16, 9.75, GT2x6, 6.5, 14, 0, 3, 14.0, 1.0, 0, 0, false, 0];” |
|---|
| Channel width | 6.5 mm | NopSCADlib vitamins/pulleys.scad:38 row GT2x16_toothed_idler, position 5 = pulley_width() 'Width of teeth / belt channel' (vitamins/pulley.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“GT2x16_toothed_idler = ["GT2x16_toothed_idler", "GT2", 16, 9.75, GT2x6, 6.5, 14, 0, 3, 14.0, 1.0, 0, 0, false, 0];” |
|---|
| Flange diameter | 14.0 mm | NopSCADlib vitamins/pulleys.scad:38 row GT2x16_toothed_idler, position 9 = pulley_flange_dia() 'Flange diameter' (vitamins/pulley.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“GT2x16_toothed_idler = ["GT2x16_toothed_idler", "GT2", 16, 9.75, GT2x6, 6.5, 14, 0, 3, 14.0, 1.0, 0, 0, false, 0];” |
|---|
| Flange thickness | 1.0 mm | NopSCADlib vitamins/pulleys.scad:38 row GT2x16_toothed_idler, position 10 = pulley_flange_thickness() 'Flange thickness' (vitamins/pulley.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“GT2x16_toothed_idler = ["GT2x16_toothed_idler", "GT2", 16, 9.75, GT2x6, 6.5, 14, 0, 3, 14.0, 1.0, 0, 0, false, 0];” |
|---|
| Hub diameter | 14 mm | NopSCADlib vitamins/pulleys.scad:38 row GT2x16_toothed_idler, position 6 = pulley_hub_dia() 'Hub diameter' (vitamins/pulley.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“GT2x16_toothed_idler = ["GT2x16_toothed_idler", "GT2", 16, 9.75, GT2x6, 6.5, 14, 0, 3, 14.0, 1.0, 0, 0, false, 0];” |
|---|
| Outer diameter | 9.75 mm | NopSCADlib vitamins/pulleys.scad:38 row GT2x16_toothed_idler, position 3 = pulley_od() 'Outer diameter' (vitamins/pulley.scad:31); unit mm: the BOM string appends mm to od = pulley_od(type) (vitamins/pulley.scad:60) | spec | github.com 2026-11-16“GT2x16_toothed_idler = ["GT2x16_toothed_idler", "GT2", 16, 9.75, GT2x6, 6.5, 14, 0, 3, 14.0, 1.0, 0, 0, false, 0];” |
|---|