| Teeth | 16 teeth | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 2 = pulley_teeth() 'Number of teeth' (vitamins/pulley.scad:30); a count, no unit | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|
| Bore diameter | 5 mm | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 8 = pulley_bore() 'Bore diameter for shaft' (vitamins/pulley.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|
| Channel width | 8 mm | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 5 = pulley_width() 'Width of teeth / belt channel' (vitamins/pulley.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|
| Flange diameter | 16.0 mm | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 9 = pulley_flange_dia() 'Flange diameter' (vitamins/pulley.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|
| Flange thickness | 1.0 mm | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 10 = pulley_flange_thickness() 'Flange thickness' (vitamins/pulley.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|
| Hub diameter | 16 mm | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 6 = pulley_hub_dia() 'Hub diameter' (vitamins/pulley.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|
| Hub length | 5.7 mm | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 7 = pulley_hub_length() 'Hub length' (vitamins/pulley.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|
| Outer diameter | 12.16 mm | NopSCADlib vitamins/pulleys.scad:31 row T2p5x16_pulley, position 3 = pulley_od() 'Outer diameter' (vitamins/pulley.scad:31); unit mm: the BOM string appends mm to od = pulley_od(type) (vitamins/pulley.scad:60) | spec | github.com 2026-11-16“T2p5x16_pulley = ["T2p5x16_pulley", "T2.5", 16, 12.16, T2p5x6, 8, 16, 5.7, 5, 16.0, 1.0, 6, 3.75, M4_grub_screw, 1];” |
|---|