Parts › Belts › Generic T5x10_pulley
0 pickedCompare
Timing pulley HTD 5M, 24 teeth, for a 15 mm belt, with flanges, set screw and 8 mm bore
Timing pulley: a picture of the part type, not this model. How it works

Generic T5x10_pulley

T5 10-tooth drive pulley for T5x6 belt (T5x10_pulley). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/pulleys.scad; positions read from the accessor functions in vitamins/pulley.scad.

Key specifications

Key specifications
Teeth10 teeth source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Teeth10 teethNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 2 = pulley_teeth() 'Number of teeth' (vitamins/pulley.scad:30); a count, no unitspecgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”
Bore diameter5 mmNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 8 = pulley_bore() 'Bore diameter for shaft' (vitamins/pulley.scad:36); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”
Channel width11.6 mmNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 5 = pulley_width() 'Width of teeth / belt channel' (vitamins/pulley.scad:33); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”
Flange diameter19.3 mmNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 9 = pulley_flange_dia() 'Flange diameter' (vitamins/pulley.scad:37); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”
Flange thickness1.7 mmNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 10 = pulley_flange_thickness() 'Flange thickness' (vitamins/pulley.scad:38); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”
Hub diameter7.9 mmNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 6 = pulley_hub_dia() 'Hub diameter' (vitamins/pulley.scad:34); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”
Hub length7 mmNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 7 = pulley_hub_length() 'Hub length' (vitamins/pulley.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”
Outer diameter15 mmNopSCADlib vitamins/pulleys.scad:30 row T5x10_pulley, position 3 = pulley_od() 'Outer diameter' (vitamins/pulley.scad:31); unit mm: the BOM string appends mm to od = pulley_od(type) (vitamins/pulley.scad:60)specgithub.com 2026-11-16“T5x10_pulley = ["T5x10_pulley", "T5", 10, 15, T5x6, 11.6, 7.9, 7, 5, 19.3, 1.7, 3, 10.7, M3_grub_screw, 1];”