Parts › Bearings › Generic HGH20CA rail
0 pickedCompare
Profile rail guide size 15: rail 15 x 15 mm with a carriage block 34 x 61 mm, a window shows the balls
Linear guide rail: a picture of the part type, not this model. How it works

Generic HGH20CA rail

Profiled linear guide rail, series size HGH20CA (series name as used by HIWIN for MGN/HGH and THK for SSR; NopSCADlib names no maker). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/rails.scad; positions read from the accessor functions in vitamins/rail.scad.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Hole diameter6.0 mmNopSCADlib vitamins/rails.scad:32 row HGH20CA, position 6 = rail_hole() 'Screw hole diameter' (vitamins/rail.scad:31); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“HGH20CA= [ "HGH20CA", 20, 17.5, 20, 60, 9.5, 6.0, 8.5, M5_cap_screw, M5_cs_cap_screw, 2.5, 2.75 ];”
Hole pitch60 mmNopSCADlib vitamins/rails.scad:32 row HGH20CA, position 4 = rail_pitch() 'Distance between screws' (vitamins/rail.scad:29); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“HGH20CA= [ "HGH20CA", 20, 17.5, 20, 60, 9.5, 6.0, 8.5, M5_cap_screw, M5_cs_cap_screw, 2.5, 2.75 ];”
Rail height17.5 mmNopSCADlib vitamins/rails.scad:32 row HGH20CA, position 2 = rail_height() 'Height of rail section' (vitamins/rail.scad:27); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“HGH20CA= [ "HGH20CA", 20, 17.5, 20, 60, 9.5, 6.0, 8.5, M5_cap_screw, M5_cs_cap_screw, 2.5, 2.75 ];”
Rail width20 mmNopSCADlib vitamins/rails.scad:32 row HGH20CA, position 1 = rail_width() 'Width of rail section' (vitamins/rail.scad:26); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“HGH20CA= [ "HGH20CA", 20, 17.5, 20, 60, 9.5, 6.0, 8.5, M5_cap_screw, M5_cs_cap_screw, 2.5, 2.75 ];”

Variations from this maker

HGH20CA carriage