Parts › Bearings › Generic MGN7 rail
0 pickedCompare
Profile rail guide size 15: rail 15 x 15 mm with a carriage block 34 x 61 mm, a window shows the balls
Linear guide rail: a picture of the part type, not this model. How it works

Generic MGN7 rail

Profiled linear guide rail, series size MGN7 (series name as used by HIWIN for MGN/HGH and THK for SSR; NopSCADlib names no maker). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/rails.scad; positions read from the accessor functions in vitamins/rail.scad.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Hole diameter2.4 mmNopSCADlib vitamins/rails.scad:26 row MGN7, position 6 = rail_hole() 'Screw hole diameter' (vitamins/rail.scad:31); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“MGN7 = [ "MGN7", 7, 5, 5, 15, 4.3, 2.4, 2.6, M2_cap_screw, M2_cs_cap_screw, 1.5, 1.5 ];”
Hole pitch15 mmNopSCADlib vitamins/rails.scad:26 row MGN7, position 4 = rail_pitch() 'Distance between screws' (vitamins/rail.scad:29); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“MGN7 = [ "MGN7", 7, 5, 5, 15, 4.3, 2.4, 2.6, M2_cap_screw, M2_cs_cap_screw, 1.5, 1.5 ];”
Rail height5 mmNopSCADlib vitamins/rails.scad:26 row MGN7, position 2 = rail_height() 'Height of rail section' (vitamins/rail.scad:27); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“MGN7 = [ "MGN7", 7, 5, 5, 15, 4.3, 2.4, 2.6, M2_cap_screw, M2_cs_cap_screw, 1.5, 1.5 ];”
Rail width7 mmNopSCADlib vitamins/rails.scad:26 row MGN7, position 1 = rail_width() 'Width of rail section' (vitamins/rail.scad:26); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“MGN7 = [ "MGN7", 7, 5, 5, 15, 4.3, 2.4, 2.6, M2_cap_screw, M2_cs_cap_screw, 1.5, 1.5 ];”

Variations from this maker

MGN7C carriage · MGN7H carriage