
Techrobots MJA-H17T 48 V, 120:1
Techrobots (泰科) MJA-H17T: robot joint actuator module with strain-wave (harmonic) gear, 48 V, 120:1, 56 N.m peak. Values from the Dynamic Robot Joint Actuator Comparison data set (CC BY 4.0, family tk-mja, entry tk-mja-h-76-120-48), which cites the maker document '14_泰科_MJA-H系列关节模组参数表_20250417.xlsx'.
Key specifications
| Rated torque | 48 N·m source |
|---|---|
| Peak torque | 56 N·m source |
| Gear ratio | 120:1 source |
| Rated speed | 25 rpm source |
| Nominal voltage | 48 V source |
| Rated current | 5 A source |
| Mass | 810 g source |
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Rated torque | 48 Nm | at the output; value of this entry; unit from the key name 'rated_torque_nm' | spec | github.com 2026-11-16“"rated_torque_nm": 48” |
| Peak torque | 56 Nm | at the output; value of this entry; unit from the key name 'peak_torque_nm' | spec | github.com 2026-11-16“"peak_torque_nm": 56” |
| Gear ratio | 120 :1 | value of this entry | spec | github.com 2026-11-16“"reduction_ratio": 120” |
| Rated speed | 25 rpm | at the output; value of this entry; unit from the key name 'rated_speed_rpm' | spec | github.com 2026-11-16“"rated_speed_rpm": 25” |
| Nominal voltage | 48 V | rated supply voltage of this variant; value of this entry; unit from the key name 'voltage_v' | spec | github.com 2026-11-16“"voltage_v": 48” |
| Rated current | 5 A | stated as continuous current; value of this entry; unit from the key name 'continuous_current_a' | spec | github.com 2026-11-16“"continuous_current_a": 5” |
| Mass | 0.81 kg = 810 g | value of this entry; unit from the key name 'weight_kg' | spec | github.com 2026-11-16“"weight_kg": 0.81” |
| Allowable max average load torque | 48 Nm | maximum allowed average load torque; value of this entry; unit from the key name 'max_allow_avg_load_nm' | spec | github.com 2026-11-16“"max_allow_avg_load_nm": 48” |
| Allowable moment load | 30 Nm | allowed bending (tilting) moment on the output; value of this entry; unit from the key name 'bending_moment_nm' | spec | github.com 2026-11-16“"bending_moment_nm": 30” |
| Allowable peak torque start stop | 56 Nm | peak torque allowed at start and stop; value of this entry; unit from the key name 'start_stop_peak_torque_nm' | spec | github.com 2026-11-16“"start_stop_peak_torque_nm": 56” |
| Backdrivable | no | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"backdrivable": false” |
| Backlash | 20 arcsec = 0.3333 arcmin | family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'backlash_arcsec' | spec | github.com 2026-11-16“"backlash_arcsec": 20” |
| Brake | no | brake option as listed: no, yes, or optional (both offered); value of this entry | spec | github.com 2026-11-16“"brake_options": [ false ]” |
| Dual encoder | yes | dual-encoder option as listed: no, yes, or optional; value of this entry | spec | github.com 2026-11-16“"dual_encoder_options": [ true ]” |
| Force sensor | no | force or torque sensor option as listed: no, yes, or optional; value of this entry | spec | github.com 2026-11-16“"force_sensor_options": [ false ]” |
| Hollow shaft diameter | 7 mm | value of this entry; unit from the key name 'hollow_shaft_diameter_mm' | spec | github.com 2026-11-16“"hollow_shaft_diameter_mm": 7” |
| Interface | EC | bus types offered, as written in the data set (EC as written); value of this entry | spec | github.com 2026-11-16“"bus_types": [ "EC" ]” |
| Ip rating | IP40 | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"ip_rating": "IP40"” |
| Length | 85.5 mm | axial length; value of this entry; unit from the key name 'length_mm_min' | spec | github.com 2026-11-16“"length_mm_min": 85.5” |
| Max. speed | 29 rpm | at the output; value of this entry; unit from the key name 'max_speed_rpm' | spec | github.com 2026-11-16“"max_speed_rpm": 29” |
| Momentary peak torque | 80 Nm | maximum allowed instantaneous load torque; value of this entry; unit from the key name 'max_allow_instant_load_nm' | spec | github.com 2026-11-16“"max_allow_instant_load_nm": 80” |
| Motor topology | radial flux | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"motor_topology": "radial flux"” |
| Outer diameter | 76 mm | value of this entry; unit from the key name 'outer_diameter_mm' | spec | github.com 2026-11-16“"outer_diameter_mm": 76” |
| Output encoder resolution | 17 bit | output-side encoder; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'output_encoder_bits' | spec | github.com 2026-11-16“"output_encoder_bits": 17” |
| Peak current | 14.5 A | value of this entry; unit from the key name 'peak_current_a' | spec | github.com 2026-11-16“"peak_current_a": 14.5” |
| Position accuracy | 0.0833 deg = 299.9 arcsec | absolute positioning accuracy; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'absolute_accuracy_deg' | spec | github.com 2026-11-16“"absolute_accuracy_deg": 0.0833” |
| Rated input power | 180 W | rated electrical input power; value of this entry; unit from the key name 'rated_input_power_w' | spec | github.com 2026-11-16“"rated_input_power_w": 180” |
| Repeatability | 0.0167 deg = 1.002 arcmin | positioning repeatability; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'repeatability_deg' | spec | github.com 2026-11-16“"repeatability_deg": 0.0167” |
| Transmission type | harmonic | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"type": "harmonic"” |
Variations from this maker
MJA-H11 24 V, 101:1 · MJA-H17S 48 V, 100:1 · MJA-H17Z 48 V, 120:1