
TiS CRA-RI70-80-PRO-3-81 48 V, 81:1
TiS (钛虎) CRA-RI70-80-PRO-3-81: robot joint actuator module with strain-wave (harmonic) gear, 48 V, 81:1, 91 N.m peak. Values from the Dynamic Robot Joint Actuator Comparison data set (CC BY 4.0, family ti-pros3, entry ti-pros3-80-81-48), which cites the maker document '2_钛虎_轻量化关节模组Pro3数据手册_20260104.pdf'.
Key specifications
| Rated torque | 42 N·m source |
|---|---|
| Peak torque | 91 N·m source |
| Gear ratio | 81:1 source |
| Rated speed | 38 rpm source |
| Nominal voltage | 48 V source |
| Rated current | 6.1 A source |
| Mass | 1,030 g source |
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Rated torque | 42 Nm | at the output; value of this entry; unit from the key name 'rated_torque_nm' | spec | github.com 2026-11-16“"rated_torque_nm": 42” |
| Peak torque | 91 Nm | at the output; value of this entry; unit from the key name 'peak_torque_nm' | spec | github.com 2026-11-16“"peak_torque_nm": 91” |
| Gear ratio | 81 :1 | value of this entry | spec | github.com 2026-11-16“"reduction_ratio": 81” |
| Rated speed | 38 rpm | at the output; value of this entry; unit from the key name 'rated_speed_rpm' | spec | github.com 2026-11-16“"rated_speed_rpm": 38” |
| Nominal voltage | 48 V | rated supply voltage of this variant; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'voltage_v' | spec | github.com 2026-11-16“"voltage_v": 48” |
| Rated current | 6.1 A | stated as continuous current; value of this entry; unit from the key name 'continuous_current_a' | spec | github.com 2026-11-16“"continuous_current_a": 6.1” |
| Mass | 1.03 kg = 1,030 g | value of this entry; unit from the key name 'weight_kg' | spec | github.com 2026-11-16“"weight_kg": 1.03” |
| Allowable axial load | 23.68 kN | allowed axial load on the output; value of this entry; unit from the key name 'axial_load_kn' | spec | github.com 2026-11-16“"axial_load_kn": 23.68” |
| Allowable max average load torque | 58 Nm | maximum allowed average load torque; value of this entry; unit from the key name 'max_allow_avg_load_nm' | spec | github.com 2026-11-16“"max_allow_avg_load_nm": 58” |
| Allowable moment load | 320 Nm | allowed bending (tilting) moment on the output; value of this entry; unit from the key name 'bending_moment_nm' | spec | github.com 2026-11-16“"bending_moment_nm": 320” |
| Allowable peak torque start stop | 91 Nm | peak torque allowed at start and stop; value of this entry; unit from the key name 'start_stop_peak_torque_nm' | spec | github.com 2026-11-16“"start_stop_peak_torque_nm": 91” |
| Allowable radial load | 10.42 kN | allowed radial load on the output; value of this entry; unit from the key name 'radial_load_kn' | spec | github.com 2026-11-16“"radial_load_kn": 10.42” |
| Backdrivable | no | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"backdrivable": false” |
| Backlash | 20 arcsec = 0.3333 arcmin | value of this entry; unit from the key name 'backlash_arcsec' | spec | github.com 2026-11-16“"backlash_arcsec": 20” |
| Brake | optional | brake option as listed: no, yes, or optional (both offered); value of this entry | spec | github.com 2026-11-16“"brake_options": [ false, true ]” |
| Brake torque | 1 Nm | holding torque of the optional brake; value of this entry; unit from the key name 'brake_torque_nm' | spec | github.com 2026-11-16“"brake_torque_nm": 1” |
| Dual encoder | yes | dual-encoder option as listed: no, yes, or optional; value of this entry | spec | github.com 2026-11-16“"dual_encoder_options": [ true ]” |
| Encoder resolution | 20 bit | motor-side encoder; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'motor_encoder_bits' | spec | github.com 2026-11-16“"motor_encoder_bits": 20” |
| Force sensor | no | force or torque sensor option as listed: no, yes, or optional; value of this entry | spec | github.com 2026-11-16“"force_sensor_options": [ false ]” |
| Hollow shaft diameter | 15 mm | value of this entry; unit from the key name 'hollow_shaft_diameter_mm' | spec | github.com 2026-11-16“"hollow_shaft_diameter_mm": 15” |
| Interface | CAN / EC | bus types offered, as written in the data set (EC as written); value of this entry | spec | github.com 2026-11-16“"bus_types": [ "CAN", "EC" ]” |
| Length | 73 to 89 mm | axial length; value of this entry; unit from the key name 'length_mm_min'; range as stated (min and max keys) | spec | github.com 2026-11-16“"length_mm_min": 73, "length_mm_max": 89” |
| Max mass | 1.21 kg | upper end of the stated mass range (weight_kg_max; the lower end is under mass); value of this entry; unit from the key name 'weight_kg_max' | spec | github.com 2026-11-16“"weight_kg_max": 1.21” |
| Max. speed | 48 rpm | at the output; value of this entry; unit from the key name 'max_speed_rpm' | spec | github.com 2026-11-16“"max_speed_rpm": 48” |
| Motor topology | radial flux | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"motor_topology": "radial flux"” |
| Outer diameter | 80 mm | value of this entry; unit from the key name 'outer_diameter_mm' | spec | github.com 2026-11-16“"outer_diameter_mm": 80” |
| Output encoder resolution | 20 bit | output-side encoder; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'output_encoder_bits' | spec | github.com 2026-11-16“"output_encoder_bits": 20” |
| Peak current | 8.4 A | value of this entry; unit from the key name 'peak_current_a' | spec | github.com 2026-11-16“"peak_current_a": 8.4” |
| Rated input power | 500 W | rated electrical input power; value of this entry; unit from the key name 'rated_input_power_w' | spec | github.com 2026-11-16“"rated_input_power_w": 500” |
| Repeatability | 0.001 deg = 0.06 arcmin | positioning repeatability; family value in 'shared', which this entry inherits (data/schema.md inheritance rules); unit from the key name 'repeatability_deg' | spec | github.com 2026-11-16“"repeatability_deg": 0.001” |
| Transmission type | harmonic | family value in 'shared', which this entry inherits (data/schema.md inheritance rules) | spec | github.com 2026-11-16“"type": "harmonic"” |
Variations from this maker
CRA-RI80-110-PRO-2-101 48 V, 101:1 · CRA-RI80-110-PRO-2-121 48 V, 121:1 · CRA-RI80-110-PRO-2-161 48 V, 161:1 · CRA-RI80-110-PRO-2-51 48 V, 51:1 · CRA-RI80-110-PRO-2-81 48 V, 81:1 · CRA-RI100-142-PRO-2-101 48 V, 101:1 · CRA-RI100-142-PRO-2-121 48 V, 121:1 · CRA-RI100-142-PRO-2-161 48 V, 161:1 · CRA-RI100-142-PRO-2-51 48 V, 51:1 · CRA-RI100-142-PRO-2-81 48 V, 81:1 · CRA-RI110-170-PRO-2-101 48 V, 101:1 · CRA-RI110-170-PRO-2-121 48 V, 121:1 · CRA-RI110-170-PRO-2-161 48 V, 161:1 · CRA-RI110-170-PRO-2-51 48 V, 51:1 · CRA-RI110-170-PRO-2-81 48 V, 81:1 · CRA-RI30-40-PRO-2-101 48 V, 101:1 · CRA-RI30-40-PRO-2-51 48 V, 51:1 · CRA-RI40-52-PRO-2-101 48 V, 101:1 · CRA-RI40-52-PRO-2-51 48 V, 51:1 · CRA-RI50-70-PRO-2-101 48 V, 101:1 · CRA-RI50-70-PRO-2-51 48 V, 51:1 · CRA-RI50-70-PRO-2-81 48 V, 81:1 · CRA-RI60-80-PRO-2-101 48 V, 101:1 · CRA-RI60-80-PRO-2-121 48 V, 121:1